MARSHAL STABILITY TESTING MACHINE MODIFIED-DIGITAL-FOR 6

MARSHAL STABILITY TESTING MACHINE MODIFIED-DIGITAL-FOR 6" DIA SPECIMEN

Model Number : TM-041MD

None


SALIENT FEATURES :

  1. Alphanumeric 4 line display indicating: Load, displacement, status, peak value of flow and Load.
  2. Digital display to measure the load up to 10000 Kg /100 KN, Least Count 0.1 kg/0.001KN
  3. Displacement resolution: 0.01mm
  4. Load and displacement both at the single screen. No need for the flow meter and Proving ring.
  5. Only one person needed for test
  6. Hassle free operation, no need of TARE.
  7. Load cell can also be calibrated using standard reference
  8. Panel cut out size 92 x 188 mms.
  9. Facility to read in Kg as well as KN
  10. Peak hold facility to read load and flow value until reset
  11. Auto cutoff at the pre decided load.
  12. With safety cut off on lower and upper limit
  13. Auto internal calibration facility.(external calibration has to be done after a year)
  14. Backlight in the indicator to observe the reading clearly even in the dark.
  15. Auto reverse on completion of test
  16. Fully powder coated in 2 tone color for aesthetic finish
  17. With PC/printer interface with software for direct printout of calculated results (at extra cost)

With following accessories :

  1. Marshal Mould, cylindrical 6" dia.: 3 Nos.
  2. Base plate: 3 Nos.
  3. Collars 6.1/8" dia.: 3 Nos.
  4. Marshal Compaction hammer, 10.2kg weight and 45.7cm drop: 2 Nos.
  5. Specimen extractor plate of 6" dia: 1 No. (Frame type sample extractor available at extra cost)
  6. Compaction pedestal complete with specimen holder: 1 No.
  7. Breaking head assembly, complete with gauge disc and flow meter pedestal: 1 No.
  8. Load transfer bar: 1 No.
  9. 100 KN Capacity Loading Unit motorized with uniform vertical movement of 5.08cm/min. Suitable for operation on 230 volts AC supply: 1 No.

AT EXTRA COST:

  1. RS 232 interface with software with following features@ Rs. 30000.00
  2. Direct analytical reports on computer
  3. Auto generation of load/time graph.
  4. Auto calculation of average of 3 readings for flow and load
  5. Two way communication facility ‑ Can operate the machine through PC
  6. Name of Issuing Lab and customer name can be inserted
  7. Auto date and time of testing
  8. Transfer of result to PC automatically


Essential Instruments Available at extra cost


  1. Filter Paper - Pack of 100 circles
  2. Electronic Weighing Balance
  3. Automatic Marshal Mould compactor with Digital Counter
  4. Constant Temperature Water bath with Digital Temp. display
  5. Sample extractor frame - Hydraulic or Mechanical


Note: Use of 1 KVA single phase servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.


Data and design subject to change due to continuous R&D


Click here for working video : https://www.youtube.com/watch?v=Qe8GuAkU-5c&t=165s

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image