Model No: EIE 202DP324

Inner Chamber S.S. 304. Exterior cabinet powder coated metal , Temp. Range 5° to 60°C ,Digital temp. control. Resolution 0.1°C, Accuracy ± 0.1°C ,CFC free compressors utilizing R134a eco-friendly refrigerant. Inner transparent glass/acrylic door and outer door with lock and key, Castor wheels for easy mobility, working on230V / 15A / 50 Hz.In GMP Model, Validation ports provided for temp. mapping as standard supply. On site Validation at extra cost.Detailed specification as follows:

Salient Features:

  1. Exterior boy is fabricated from Mild Steel material, which is powder coated in attractive shades.
  2. Interior chamber is also fabricated from Mirror polished Stainless Steel S.S. ‑ 304 Material
  3. Outer double walled metal door with sponge ‑ type silicon gasket for air‑tight sealing as to avoid leakage of chamber uniformity
  4. Electrical wiring as per CE Compliances ‑ with individual numbering of each internal circuitry wire for ease of maintenance & Repairing
  5. Chamber illumination is accomplished by Fluorescent light with door switch.
  6. Cord wire duly tested and inspected with stress factor as per CE standard
  7. Electric Motor of blower located at the back side of unit, which is protected with safety cover to avoid accident
  8. Standard motor of reputed companies ‑ such as CG, GODREJ or GE Make
  9. User friendly and tactfully designed chamber door and locking mechanism
  10. Aesthetic outer appearance and high quality
  11. Unit mounted on castor wheels for easy movement.
  12. Supplied complete with Stainless Steel Trays for sample placement
  13. Supplied complete IQ, OQ, PQ, DQ Documentation and instruction manual. (Only For Pharmaceutical industries)

Air Circulation:

Temperature is maintained by a quiet running blower for better air circulation throughout the chamber. Forced air circulated vertically down and re circulated throughout the chamber for uniform temperature distribution.

Heating & Cooling System:

Long lasting U Shaped tubular heaters used as heating element. Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condenser.

Trays for samples:

  1. Removable wiremess trays are part of the standard supply.
  2. Strong enough to with‑stand heavy load of test specimens, which should be equally distributed among trays.
  3. Such trays will also facilitate better air circulation.
  4. The distance between trays will be 15‑20 centimeters.

Safety Features:

High temperature safety cut off (Thermostat)

Electrical overload safety (Fuse 10 Amperes)

Time delay for compressor switch ON

Pre installation mandatory requirement : (Guarantee void in case of non compliance):

  1. An operator shall maintain Room temperature around machine preferably at 25 °C with air conditioning system or shall arrange for a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 °C .
  2. Stabilized Input Voltage of 230 Volt, 50 Hz, 20 Amps, AC Supply must be available for error less performance of the instrument. Use of Servo Controlled Stabilizer is recommended.
Construction Double walled
Interior S.S. 304 Grade mirror polished Stainless steel material
Exterior Mild steel material, which is powder coated in attractive shades
Inner working size 90X60X60 CM (HXWXD)
Chamber volume 324 Ltr.
Thermal Insulation PUF insulation to avoid thermal loss (B/w Inner chamber and exterior body)
Insulation thickness 70 mm
Insulation source Imported from "Huntsman USA"
Temperature Range 5 °C to 60 °C
Temperature Resolution 0.1 °C
Temperature Accuracy ± 0.5°C or better
Temp Uniformity ± 0.2 °C
Temperature Control MICRO-PROCESSOR based Auto tune PID Digital Temp Indicator cum Controller
Temperature Display LED Display
Temperature sensor High quality PT-100 Sensor
Illumination Fluorescent Tube light
Tube Light Make GELCO
Fluorescent light watts 11 Watts
Heating source U-shaped S.S. Tubular heaters
Heater watts 750 Watts
Blower For Forced Air circulation
Motor of Blower Marathon/GE/Any other reputed make
No. of trays 3 Nos.
Refrigeration CFC free EMERSON compressor utilizing R-134a eco friendly refrigerant
Observation Inner transparent acrylic door for quick viewing and retrieval
Door lock Ergonomic and secured key lockable door lock
Feet On Castor wheels (For easy mobility)
Electrical 230 Volt, 15A, 50 Hz, AC Supply
Overall Dimensions 920 X 1100 X 1780 (L X W X H) mm

company name
Mobile number
product name

Inquiry right arrow Inquiry left arrow INQUIRY