HIGH PRESSURE CYLINDRICAL HORIZONTAL STERILIZER-DOUBLE DOOR -MANUAL -18''X30''

None

More Information
Techincal Specification

Door Safety Features

Following door safety features are provided for maximum operator safety
1) Process-lock to prevent opening of the door during the process.
2) Process-lock to prevent opening of the door after successful completion of the test cycle.

Insulation

The gap between the sterilization chamber and outer jacket will be heavily insulated with minimum of 50-mm thick R. B. Glass Wool material to avoid thermal leakage

Piping Package

All process piping in contact with the chamber will be fabricated from SS-304 grade material with argon welding.

Steam Accessories

The jacket and chamber are provided with an over pressure safety valve. The jacket is provided with a steam trap.

Surface Finish

The inside surface of the chamber and doors are finished to a surface finish better than 0.8 Ra value. All other non-contact parts are polished to a surface finish better that 180 grit.

Temperature and Pressure Gauge

One TEMPERATURE SENSOR will be provided; - Fitted at drain outlet. Inputs/outputs of all sensors and electronic parts are monitored, processed and controlled by Microprocessor based PID Controller for accurate data processing.
A pressure gauge is connected with the inner chamber to indicate the steam pressure.

Electrical Switchgear

The control cabinet to be provided with a main isolator for the three-phase supply and a separate switch for the control supply. The fascia of the control panel is provided with indication LED’s and switches for operation. Switchgear make : Schneider

Requirement at buyer end

Water supply provision for steam generator

Type	Horizontal Steam sterilizer, Double door, Cylindrical Type
Working Chamber Size	18'' X 30'' 3 drum capacity
Chamber volume
Inner Chamber thickness	3 mm
Jacket thickness	2mm
Chamber working Pressure	2.1 kg/cm2
Jacket working Pressure	2.1 kg/cm2
Hydro test (Pressure chamber)	3.5 Kg/Cm2
Hydro test ( jacket)	4.0 Kg/cm2
Inner Chamber	Fabricated with S.S. 304
Jacket	Fabricated with S.S. 304
Operating Temperature	121°C
Door	S.S.304 plates on contact & Mild Steel non contact Sides
Door gasket	Silicon Door Gasket (Food grade)
Door gasket size	12” x 12”
Hinge & Locking Rod	Fabricated with mild steel
Central Locking parts	C.I. Casting, Wrinkle black painted
Shooting Bolts	Tempered, Chrome coated
Stand	M.S. Round Pipe
Operation	Manual cycle (For automatic Cycle, please refer to the optional accessories)
Tempe Indication	Microprocessor based PID digital temperature controller & indicator
Temperature Accuracy	0.10°C
Pressure Indication	Analogue pressure gauge
Steam Generator	Cylindrical shape steam generator made of S.S. 304 Material, Will be attached to underneath the jacket. It will be fitted with ISI marke
Pressure least count	0.2 PSI
Heating	2 Industrial immersion heaters of 9Kw and 18Kw
Other accessories	Steam trap, pressure switch, float switch , Temp Sensor , Pressure Gauge , Temp Gauge , Non return valve, PID Controller.
Wheels	Castor Wheel on all 4 stands
Documents	Operation & Maintenance Manual (SOP) DQ/IQ/OQ/PQ
Safety features	Safety valve, safety cut off device.
Multi port valve	Cylindrical shape steam generator made of S.S. 304 Material, Will be attached to underneath the jacket. It will be fitted with ISI marked
Operation on	230 Volts, 50 Hz, Single Phase, AC Supply