HIGH TEMP. FURNACE-12

HIGH TEMP. FURNACE-12" X 6" X 6"-1400°C-DIGITAL

Model Number : EIE-108H14DP7

None


Construction Details:

  1. Table mounting type
  2. Aesthetic exterior appearance
  3. Fabricated from Mild Steel Material  
  4. Box type fabrication in a composite assembly of two sections 
  5. Powder coated in attractive shades.
  6. The heating cavity is located on the left of the assembly, while the control panel with electrical gearing is positioned on the right.


Refractory:

  1. Internal refractory lining made of Hot Face,, High Alumina, Refractory Fiber insulation backed by low heat capacity.
  2. Ceramic fiber insulation of different grades with fan cooling for low skin temperature.


Heating Element:

Furnace is Equipped with Matched set of Silicon Carbide Heating Elements, which are horizontally mounted, radiate directly on both sides of the Heating Cavity to derive symmetrical heat distribution.


Optional Accessories (at extra cost)

  1. Hour Meter
  2. Over temp.protection with audio alarm
  3. Data Logger blind - Multi point recorder with software
  4. Safety door switch
  5. Programmable Temp.controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)


Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost. Price on request.



Maximum Temperature

1400°C

Operating Temperature

1350 °C for continuous run (maximum)

Temperature Accuracy

±2°C

Temperature Resolution

1°C

Chamber volume

7 Liters

Inner working size

12" X 6" X 6" (H x W x D)

Construction

Fabricated from Mild steel material, which is powder coated in attractive shades

Insulation

Ceramic Fiber wool insulation

Temperature Control

Microprocessor Based PID Temperature Programmer/controller with 32 Ramp/dwell segments and 0-5 volts output for the thyristor system.

Temperature sensor

R - Type Thermocouple

Heating element

Silicon carbide Heating Element - 6 Nos. 18mm dia x 300 mm Length

Door System

Insert type, swing aside

Time to reach 1250°C

2.5 hour

Power Control

Thyristor system

Power rating

9 Kw

Power Supply

230 Volts, 1-phase, A.C. Supply, 50 Hz

Heating of Test space

150 W x 150 H x 300 D (mm) (6” x 6” x 12”)

Overall Dimensions

1350(L) X 850(W) X 725(H) Approx.

Weight (Approx.)

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image