.png)
.jpg)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
Job Application
Hot Air Oven
Model Number : EIE-101DP92
Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution Temp. Range. 50˚C to 250˚C , Auto tune Dual Display Digital, forced air circulation, Working on 230 Volts AC Single Phase.
OVEN SIZE
- 30 X 30 X 30 CM
- 35 X 35 X 35 CM
- 45 X 45 X 45 CM
- 60 X 45 X 45 CM
- 60 X 60 X 60 CM
- 70 X 60 X 60 CM
- 70 X 70 X 100 CM
- 90 X 60 X 60 CM
- 90 X 60 X 45 CM
- 90 X 90 X 60 CM
- 100 X 100 X 100 CM
- 100 X 100 X 200 CM
- 150 X 60 X 60 CM
- 125 X 125 X 100 CM
MATERIAL OF CONSTRUCTION
- INNER S.S.
- COMPLETE S.S.(GMP)
CONTROLLING SYSTEM
- DIGITAL
- THERMOSTATIC (NON DIGITAL)
-
More Information
-
Technical specification
-
Accessories
-
Spares
More Information
Salient features :
- CE Certified
- Internal circuit wiring as per CE Norms
- 65mm high density Glass wool insulation on all sides to offer minimum chamber heat loss
- Oven is fitted with heating elements on all three sides, ensuring uniform temperature distribution throughout the working chamber
- Sealed and enclosed heaters to working chamber for minimum heat loss
- 80/20 nichrome heating elements, ensuring long lasting and continuous heating within the chamber
- Special heavy duty Stainless steel lock and door hinges with spring and roller mechanism
- Stainless steel crimped wire mesh Shelves to withstand heavy load and to offer minimum resistance to air circulation for better heat distribution
- Provision to add more shelves, as per requirement of test - Adjustable Shelves to place test samples or Glass wares of varying dimensions
- Adjustable air ventilation mounted at top
- Operation on 220/230 Volt, 50 Hz, Single phase, AC Supply
- With built-in forced air circulation arrangement for uniform heat distribution inside the working chamber
- Complete with pilot indicating lamps, 2 meter cord wire and power plug.
Technical specification
|
Inner working size |
45 X 45 X 45 CM (H X W X D) |
|
Chamber volume |
92 liters |
|
Inner chamber |
Made of Stainless Steel S.S. 304 ‑ mirror polished material. |
|
Outer Chamber |
Fabricated from CRC Material |
|
Paint |
Powder coating in attractive shades |
|
No. of trays |
2 Nos. (Additional shelf at extra cost) |
|
Temperature Range |
50°C to 250°C |
|
Temperature Sensors |
PT-100 Type |
|
Temperature controller |
Microprocessor based Auto tune ‑ PID controller |
|
Temperature Accuracy |
± 1°C or better |
|
Temperature Resolution |
0.1°C |
|
Power Consumption |
220/230 Volt, 50 Hz, Single phase, AC Supply |
|
Mobility |
Bench Top Model, Fix Legs |
|
Rating |
1.5 KW |
|
Overall Dimensions |
635 X 720 X 790 (L X W X H) mm |
|
Weight (Approx.) |
72 kg |
Accessories
OVER TEMP PROTECTION SYSTEM-WITH AUDIO ALARM
The over temp. protection system is designed to protect your Instrument from overheating. It will cut the power to the heating element when the temperature of the Instrument gets too high. If one temp.control system fails, this system will take over. This will cut off the current to the heater at the preset temp. with audible alarm.
DIGITAL TEMPERATURE CONTROLLER WITH SOAK TIMER
The function of a soak timer PID Controller is to control the temperature at the specified setpoint for the period of soak time set by user. After the soak time is over the control output will be disabled. The second relay can be configured as an annunciator to indicate that soak is finished. Soak time is in minutes .
Spares
