LAMINAR AIR FLOW-HORIZONTAL-G.I. WITH PU COATING-TABLE S.S. 304-2 X 2 X 2 FT-MINI PLEAT HEPA FILTER-

Model Number : EIE-111HP2

None

Salient Features:

Cleanliness : ISO Class 5 as per ISO 14644‑1
S.S.304 work table
Polycarbonate front door
Mini Pleat HEPA Filter‑ separator less (H‑14 rating)

Miniplate HEPA filter (H 14 RATING):

Particle retention will be 0.3 micron at rated velocity, Pressure drop will be 23 mm WG, Efficiency 99.997%. Protected with specially perforated SS grill at the downstream side.

Pre filter:

Pre‑Filter size will be dependent on the size selected. Particle retention down to 5 micron at rated velocity, Pressure drop 6 mm WG, Efficiency 95 % Protected with specially perforated SS grill.

Blower assembly:

Consists of a 1/6 HP,1440 RPM, single phase Motor with double end shaft and a pair of aluminum centrifugal type impeller directly coupled on both ends of the motor & encased within an MS blower housing.

Material of construction:

The complete LAMINAR AIR FLOW BENCH will be fabricated by using Powder coated 18 SWG CRC sheet with square pipes. Front door made of 4 mm clear polycarbonate, with double folding facility. Working table will be of complete stainless steel (S.S.304). Ultra violet lamp of 3 feet 30 watts‑Philips‑ Holland make will be provided.

Standard accessories:

The equipment will be provided with LED LIGHT FITTING, Gas cock, castor wheels, Inclined Manometer, additional 5 amps power point, side screens made of 4 mm polycarbonate.

Direction of Flow	Horizontal
Velocity	90 FPM ± 20%
HEPA Filter	2` X 2` (1 No.)
Particle retention	Above 0.3 micron.
Blower Assembly	1/6 HP, 1440 RPM
Noise Level	65 decibel ± 5%
Rate of air flow	0.40 to 0.75 M/Seconds (90 FPM)
Vibration level	< 2.5 micron