REFRACTORY FURNACE - 12" X 8" X 8"-1200°C

Model Number : EIE-108DP12

Light weight with ceramic wool insulation. The outer casing made of thick mild steel sheets painted attractively. Heating Chamber consist of grooved refractory bricks in which heating elements are inserted in coil form and are easily replaceable. Temperature controlled by Dual display microprocessor based Digital temperature indicator cum controller with K type sensor. compensating cable etc. working on 440 V. Max. Temperature.: 1200 °C. & Working Temp.: 1150 °C.

Horizontal, front loading type:

In this improved model, ceramic fiber wool insulation (instead of brick insulation) has been provided resulting in weight and size reduction of furnace. The weight and size of the furnace is 1/4 and 30% respectively as compared to brick furnace. The heat up time is less. heat loss is very low‑resulting in power saving.

Vent Port:

Built in vent port for removal of noxious gases etc. preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.

Calibration port (If required by indenter):

Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment

Safety Features:

Thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition.

Standard Fittings supplied with the instrument:

Compensating cable
Indicating lamps
Indian Standard Power plug & cord

Optional Accessories (at extra cost)

Hour Meter
Over temp. protection with audio alarm
On site Validation services
Data Logger blind - Multi point recorder with software
Safety door switch
Programmable Temp.controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)

Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost.

Inner working size	12" x 8" x 8" (300 mm D x 200 mm W x 200 mm H)
Chamber volume	12 liters
Construction	Exterior body made of Mild Steel - Powder coated
Working Temperature	1150°C
Maximum Temperature	1200°C
Temperature Accuracy	± 5 °C
Temperature Resolution	1 °C
Temperature sensor	K - type sensor
Temperature Control	Dual display microprocessor based Digital temperature indicator cum controller
Insulation	Ceramic fiber wool insulation
Power Consumption	7.5 KW
Heating	KANTHAL A 1 wire in coil form placed in the Elements ribs & easily replaceable
Circuit Wiring	As per CE Norms
Overall Dimensions	610 X 860 X 840(L X W X D) mm
Weight (Approx.)	116 Kg
Power Supply	440 Volts, Three phase, AC Supply
Standard Supply	Cord Wire 2.5 meter Long
	Power Plug
Optional fittings at extra cost	Software
	Digital Timer
	Over Temp Protection System - with Audio Alarm
	Hour meter