Compliance with following international standards:
IS : 13630 (Part - 6), ISO 10545 (Part-4)
Introduction:
- Electro-Mechanical Design, quite and vibration free operation, Rate of loading controlled through AC drive.
- Capacity : 500 kgf
- Least Count : 0.1 Kgf
- Accuracy : 0.2% of Full Scale
Salient Features:
- Standard Digital Model with Load Cell
- Suitable for fired sample test on the same machine
- Suitable for MOR Test of Ceramic Tiles / Bars as per IS0 : 10545 (Part-4) and IS : 13630
- Direct reading possible for different shapes of tiles (Square, Rectangular and Round)
- Direct Display of Load / Collapsing Force
- Selectable Test Units - Kg, KN
- Auto-stop upon completion of Test.
- Provision for emergency switch in case, if user wants to stop the load applicator at certain height
- With LCD Display digital control panel.
- INTERGERATED AC INDUCTION MOTOR WITH DRIVE to control rate of Loading.
- With special guard to protect the operator against Ceramic splinters
- With 2 Rubber Lined rollers of 30 mm diameter
- With adjustable Test Span
- With Auto-Calibration facility using standard Cast Iron Weights and standard code (Weights will not be supplied with the machine)
- Complete Unit is powder coated in attractive shades
- Operation on 230 Volt, 50 Hz, Single Phase, AC Supply
Support Rod and Central Load Applicator
- 02 Nos. cylindrical support rods and 01 central load applicator rod covered with rubber
- One cylindrical support rod is slightly pivotable
- Other cylindrical support rod is slightly rotatable about its own axis.
- Diameter of all Metal rods : 20 ± 1 mm
- Thickness of rubber : 5 ± 1 mm
- Hardness of rubber : 50 ± 1 mm
Supplied with MOR Software (Optional accessories):
- PC Software to log & Modify the generated date
- Two way communication with the machine
- Direct reading of MOR value and Breaking strength in excel format
- Reading can be saved and printed from the computer
- Connection through RS-232 port
- User can start/stop the machine form the computer
- User can enter Batch no, Date, Time, Dimensions of the test samples for report purpose
- User can enter company LOGO for report generation
- Can export the generated report in PDF, EXCEL, WORD Format.
Note : 3 KVR servo controlled stabilizer is recommended
Platform Size |
300 X 300 MM (30 X 30 CM) |
Design |
Electro-Mechanical |
Operation |
Quiet and Vibration free |
Controlling System |
AC Variable Frequency Drive with AC Induction Motor |
Load cell Capacity |
500 kgf (5 KN) |
Least count for load |
100grams |
Load resolution |
0.1 kg |
Test units |
KG, KN Selectable |
Motor Speed Control |
Through AC Drive |
Accuracy |
0.2% of full scale |
Can accommodate |
Maximum tile size of 300 x 300 mm (30 x 30 cm) |
Display |
LCD Display |
Controller |
Microprocessor Based Controller |
Construction |
Mild steel body |
Paint |
Powder coating |
Power Supply |
230 volts, 50 hz, single phase, AC Supply |
Overall Dimensions |
680 X 810 X 1150(L X W X D) mm |