DUCTILITY TESTING MACHINE - SEMI AUTOMATIC

Apparatus Description:

The apparatus consists of water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed in a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier, which slides over a rotating threaded shaft with a clutch.

1. Unit is fitted with Multi‑purpose Dedicated Touch screen Graphics controller, which serves the purpose of multi‑functionality.
2. Heater on/off, Stepper Motor on/off, Stirrer on/off, Digital Temperature control and Digital Elongation measurement ‑ All these functions are operated & controlled through TOUCH SCREEN CONTROLLER.
3. Stepper Motor to achieve variable speed range from 10‑100 mm/min
4. Speed is selected/altered through Touch screen Controller with one‑touch. Required speed can be entered using online keyboard.
5. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath.
6. A pointer fixed to the carrier moves over a scale graduated from 0‑100 cm x 1mm fixed on the bath with "0" (Zero) of the scale towards the fixed plates side.
7. An operator can also log the Elongation Measurement readings directly into the TOUCH SCREEN CONTROLLER, with one touch Push. No need to observe it manually on the scale, thereby eliminating the Human Error.
8. An operator can also cross verify the logged elongation readings with stainless steel scale to authentic the generated readings.
9. Water bath inside is fabricated from of stainless steel material with insulation and fitted with water drain cock
10. Water bath is also fitted with immersion heater for temperature control.
11. Control panel is equipped with Mains switch, Heater indication lamp, Stirrer indication lamp and Touch screen controller.
12. Temperature control Accuracy : 0.1°C
13. Speed range : 10‑100 mm/min
14. Heater watts : 750 Watts
15. Power consumption : 1 KW
16. Supplied complete with : Three briquette moulds
17. Operates on : 230 Volts, 50 Hz, single phase, AC Supply

Note : Refrigerated ductility testing machine to operate at 25 °C with control accuracy of ± 0.5 °C also available. Price on request.

Optional Accessories At Extra Cost

1. Data acquisition software 
2. Elastic Recovery Mould with Base Plate
3. Glass Thermometer 0 - 44°C X 0.2°C
4. Mould casting plate (3 Nos.)

Click here for working video : https://www.youtube.com/watch?v=SxU00_wlzA4&t=391s