KINEMATIC VISCOSITY BATH-(ABOVE AMBIENT)-FOR 8 VISCOMETERS-

KINEMATIC VISCOSITY BATH-(ABOVE AMBIENT)-FOR 8 VISCOMETERS-

Model Number : EIE-PTLT-109AA8

None


Compliance with Following International Standards :

IP 71, ASTM D445, ASTM D446,IS 1448:P : 25 Sec I


Purpose :

Used to determine the viscosity of oils and fuel, above room temperature up to a maximum of 120 °C. Generally used @ 40°C but can also be used at any other temperature between measuring range. Can also be used for other application where full visibility of sample and constant temp. is important for the test.


Construction :

  1. Compact and self contained unit
  2. Rectangular shape
  3. Double walled unit with Glass wool insulation
  4. Inner Chamber is made of stainless steel (SS - 304)
  5. Outer body made of G.I. Powder Coated
  6. With toughened glass window panel / Heat resistant
  7. Observation Window on both sides (Front & Rear)
  8. Inner chamber is equipped with slow speed motorized stirrer
  9. Accommodates 8 (EIGHT) Viscometers
  10. Work space illuminated brilliantly without glare
  11. Temp is controlled by Digital Microprocessor based PID Controller with certificate of calibration
  12. All electrical controls are mounted on a drawer chassis in the side part of the case of the bath.
  13. DIGITAL STOP WATCH is mounted on the control panel to precisely observe the elapsed time for fulid passing from viscometer lower mark to upper mark or vice versa
  14. Designed for easy cleaning and simple maintenance
  15. Built-in boost for initial fast heating
  16. Glass U Tube Viscometers of various size and shapes available. These are to be procured at extra cost.
  17. Digital temperature controller with resolution of 0.01 °C is also available. Price on request.


Optional Accessories At Extra Cost :

  1. Voltage Stabilizer (Highly recommended)
  2. Temperature calibration certificate as per ISO/IEC : 17025 (NABL)
  3. Thermometer glass ‑ IP 121C / IP 120 C or any other range as per the application
  4. Glass U Tube Viscometer to be purchased at extra cost
  5. viscometer rack for safe keeping of U Tube Viscometer - can accommodate 6 tubes on a bench top

Temperature Range

Ambient + 5 °C to 120 °C

Temperature Accuracy

@ 40 °C ± 0.1 °C

Temperature Display

LED Digital display

Temperature controller

Microprocessor based DIGITAL PID Controller

Temperature Resolution

0.1 °C

Power Supply

230 Volts, 50 Hz, Single Phase, AC Supply

RELEVANT STANDARD

ASTM D445

Temperature sensor

PT-100 Sensor

Heater Rating

2500 watts

Sample Holder

65mm dia size

Working Chamber Size

370 L x 260 W x 350 D (mm)

Chamber volume

40 Liters

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image