KINEMATIC VISCOSITY BATH (BELOW AMBIENT)-FOR 4 VISCOMETERS-

KINEMATIC VISCOSITY BATH (BELOW AMBIENT)-FOR 4 VISCOMETERS-

KINEMATIC VISCOSITY BATH - BELOW AMBIENT - FOR 4 VISCOMETERS-
Model No: EIE-PTLT-109BA4

Used for determination of kinematic and instrinsic viscosity of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 4603 and other equivalent methods Double walled, outer chamber made of G.I. – powder coated, with removable toughened Glass window panel, inner chamber made of S.S, FHP motorized stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor Provided with built-in refrigeration system, Temp. range 10° C to 50° C.Control accuracy± 0.1° C. complete with Lighting attachment with long life, Low wattage lamp. Universal Viscometer holder. Tray for Viscometer ,Working on 230 V single phase.

Compliance with following International Standards :

ASTM D445, IS 1448 (P-25)


Application :

Used for determination of kinematic and intrinsic viscosity Of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 4603 and other equivalent methods


Annexure :

  • Microprocessor based circuitry assures precise, reliable temperature control within specified tolerances throughout the operating range of the bath i.e. 10 °C to ambient temperature.
  • Dual digital displays show set and actual bath temperature
  • Simple push button controls and digital display permit easy setting and monitoring of bath temperature.
  • Bath accommodates 04 Nos glass capillary reversion viscometers of various types at a time
  • Viewing the viscometers is made easy by glare‑free fluorescent illumination.
  • Temperature control uniformity is assured by means of motorized stirrer, which provides complete circulation without turbulence.
  • Frost free glass window for low temperature bath
  • Control panel is mounted on a side of the bath
  • Complete exterior body is finished with attractive powder coated paint


Technical Specifications of Refrigeration System:

  • Refrigeration system : Emerson/Danfoss Make refrigeration system
  • Compressor : Hermetically Sealed Compressor
  • Condenser : Fin & Tube type Air‑Cooled Condenser
  • Refrigerant : R134a


Optional Accessories At Extra Cost :

  • Voltage Stabilizer (Highly recommended)
  • Temperature calibration certificate as per ISO/IEC : 17025 (NABL)
  • Thermometer glass ‑ IP 30C (‑23.6 / 26.4°C x 0.05°C ) ASTM 45C:
  • Glass U Tube Viscometer to be purchased at extra cost
  • viscometer rack for safe keeping of U Tube Viscometer - can accommodate 6 tubes  on a bench top


Note

Use of RO/DM Water as a bath media is mandatory for long lasting performance of Heaters. Warranty void in case of non compliance




Overall Dimensions 940 X 440 X 670 (L X W X D) mm
Volume of the bath 25 Liters capacity
Temperature Control Range 10 °C to Ambient
Temperature controller Microprocessor based Auto‑Tune PID Digital Temp controller cum indicator
Temperature sensor PT ‑ 100 Sensor
Temperature Display LED Display
Display Resolution 0.1°C
Temperature Accuracy ± 0.1 °C (@ 25°C)
Heater Immersion heater
Viewing window Vacuum glass window for frost free viewing below 5°C range
Stirrer 1400rpm motor with stirrer for uniform Temperature
Stirrer Motor Of reputed make
Inner chamber material Stainless Steel S.S. ‑ 304 Grade with tempered glass
Exterior body Fabricated from mild steel material, which is powder coated in attractive shades
Illumination PL Lamp
Accessories Supplied complete with Viscometer holders
Accommodates 04 Nos of viscometers
Electrical Requirements 220 volts, 50 Hz, AC Supply
Power Consumption 1.5 KW
Weight (Approx.) 52 KG

INQUIRE NOW
name
company name
Email
Mobile number
product name
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image