UL

ULTRA LOW TEMP. KINEMATIC VISCOSITY BATH (-80˚C TO AMBIENT)

ULTRA LOW TEMP. KINEMATIC VISCOSITY BATH - -80˚C TO AMBIENT-COMPLETE SS
Model No: EIE-410ULDP80

Suited for 2 Viscometer at a time. Compliance with following International Standards : ASTM D445, IS 1448 (P 25). Detailed Specification as follows:

Compliance with following International Standards :

ASTM D445, IS 1448 (P-25)


Application :

Used for determination of kinematic and intrinsic viscosity Of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 4603 and other equivalent methods


Annexure :

  • Microprocessor based circuitry assures precise, reliable temperature control within specified tolerances throughout the operating range of the bath i.e. 10 °C to ambient temperature.
  • Dual digital displays show set and actual bath temperature
  • Simple push button controls and digital display permit easy setting and monitoring of bath temperature.
  • Bath accommodates 02 Nos glass capillary reversion viscometers of various types at a time
  • Viewing the viscometers is made easy by glare‑free fluorescent illumination.
  • Temperature control uniformity is assured by means of motorized stirrer, which provides complete circulation without turbulence.
  • Frost free glass window for low temperature bath
  • Control panel is mounted on a side of the bath
  • Complete exterior body is finished with stainless steel AISI304.


Technical Specifications of Refrigeration System:

  • Refrigeration system : Emerson/Danfoss Make refrigeration system
  • Compressor : Hermetically Sealed Compressor
  • Condenser : Fin & Tube type Air‑Cooled Condenser
  • Refrigerant : R134a


Optional Accessories At Extra Cost :

  • Voltage Stabilizer (Highly recommended)
  • Temperature calibration certificate as per ISO/IEC : 17025 (NABL)
  • Glass thermometer - ASTM/IP as required for the test
  • Glass U Tube Viscometer to be purchased at extra cost
  • viscometer rack for safe keeping of U Tube Viscometer - can accommodate 6 tubes on a bench top


Note

Bath media will be available at extra cost.




Bath None
Dimensions of bath 300 x 260 x 300 mm (L x W x D)
Volume of the bath 23 Liters capacity
Temperature Control Range : -80 °C to ambient
Temperature controller Microprocessor based Auto Tune PID Digital Temp controller cum indicator
Temperature sensor PT 100 Sensor
Temperature Display LED Display
Display resolutions 0.1 °C
Temperature Accuracy ± 0.5 °C
Heater Immersion heater
Viewing window Vacuum glass window for frost free viewing below 5°C range
Stirrer 1400rpm motor with stirrer for uniform Temperature
Stirrer Motor Of reputed make
Inner chamber made from Stainless Steel S.S. 304 Grade
Exterior body made from Stainless Steel S.S. 304 Grade
Illumination PL Lamp
Accessories Supplied complete with Viscometer holders
Accommodate 02 Nos of viscometers
Bath Media ISOPROPYL ALCOHOL or suitable heat transfer fluid (To be supplied by user)
Electrical Supply 220 volts, 50 Hz, AC Supply
Power Consumption 2 KW
Refrigeration System None
Refrigeration Emerson/Danfoss Make refrigeration system
Compressor Hermetically Sealed Compressor
Condenser Fin & Tube type Air Cooled Condenser
Cascade System For below -80°C ranges
Refrigerant R404a

INQUIRE NOW
name
company name
Email
Mobile number
product name
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image