PH METER-TABLE TOP - MICROPROCESSOR BASED-(0.01 PH)-(ATC)-(THREE POINT CALIBRATION)-(LMPH 10)-

Model No: LMPH10H

Bench top pH Meter with 3 point calibration, Big LCD Display, Auto Buffer recognition, simultaneous display of pH and Temp; Automatic Temp.compensation, Hold, Reset and Auto OFF Function, USA or NIST Buffer option, Help message on screen. Measuring range : -2 to 16 pH, Accuracy ± 0.01 pH, Supplied with pH Electrode, Liquid Calibration pH Buffer Bottle ( 4.01, 7.00 pH), Temperature Probe, Electrode Stand, 9 V Power adapter, Instruction Manual. Further details and Instrument image mentioned as under

LMPH10H-pH meter is large LCD display with white back light. It can displays many useful prompt messages to helps you quickly and easily measuring the samples.

Silent Features:

During the pH mode, Up to 3 points push-button calibration with auto- buffer recognition. (USA & NIST Buffer)
Selectable pH buffer standards and temperature units.
Automatically Electrode diagnosis shows the pH slope and offset.
Automatic Temperature Compensation (ATC) ensures highly accurate measurement over the entire range.
Automatic endpoint function freezes the stable measured values.
Help message as an operational guide to help you to understand how to use meter.
Setup menu allows setting pH Buffer set, number of calibration point, temperature, unit etc. user customizes buffer standards, calibration points, stability conditions, resolution, temperature units, date and time to meet measurement requirements.
Reset function can resumes all settings to factory default values.
Expanded memory stores and recalls up to 100 readings.
USB Interface.

IMPORTANT NOTE FOR MAINTENANCE OF PH ELECTRODE

To ensure an optimum response time, the glass sensor tip and the reference junction of the pH electrode should be kept moist and not be allowed to dry out when not in use. Placing the electrode in a small glass filled with pH storage solution or replacing the solution in the protective cap is a suitable way to store the electrode. It is recommended to rehydrate the electrode after a cleaning procedure by soaking for at least one hour before taking measurements. pH Storage solution can be supplied at extra cost

Modes	pH, mV, Temperature
pH Range	-2.00 to 16.000pH
pH Resolution	0.01 pH
pH Accuracy	±0.01 pH
Calibration	upto 3 points
pH Buffer options	USA (pH 4.01, 7.00, 10.01)pH Buffer NIST (pH 4.01, 6.86, 9.18)
Automatic Buffer Recognization	Yes
pH Slope Display	Yes
mV Range	± 1999 to 1999 mV
mV Accuracy	±1 mV
mV Resolution	1 mV
Temp. Range	0 to 105°C
Temp. Accuracy	±0.5°C
Operating Temperature	10 to 40°C
Relative humidity	< 80%
Reset Function	Yes
Interface	USB
Hold Function	Automatic at end point or Manual
Memory	upto 100 readings
Connector	BNC
Display	LCD with White Back Light
Display Size	125 × 100 mm
Power Supply	DC 5V adapters, using AC 220V / 50Hz,
Packing Dimensions (LxWxH )	300 × 245 × 185 mm
Net Weight / Gross Weight	0.65kg / 1.68kg