Detailed specification as follows:
Salient Features:
- Exterior boy is fabricated from S.S. 304 Material
- Interior chamber is fabricated from Mirror polished Stainless Steel S.S. 304 Material
- Metal door with sponge - type silicon gasket for air-tight sealing
- Electrical wiring as per CE compliance
- Electric Motor located at the back side of unit, which is protected with safety cover to avoid accident
- User friendly and tactfully designed chamber door and locking mechanism
- Aesthetic outer appearance and high quality
- Unit mounted on castor wheels for easy movement.
- Supplied complete with Stainless Steel Trays for sample placement
- IQ, OQ, PQ, DQ Documentation available at extra cost
Air Circulation:
Temperature is maintained by a quiet running blower for better air circulation throughout the chamber. Forced air circulated vertically down and re-circulated throughout the chamber for uniform temperature distribution.
Heating System:
Long lasting U-Shaped tubular heaters used as heating element.
Trays for samples:
- Trays of the incubator will be manufactured from strong Stainless steel rods - strong enough to with-stand heavy load of test specimens, which should be equally distributed among trays.
- Such trays will also facilitate better air circulation.
- The distance between trays will be 15-20 centimeters.
Safety Features:
- High temperature safety cut off (Thermostat)
- Electrical overload safety (Fuse 10 Amperes)
Pre installation mandatory requirement : (Guarantee void in case of non compliance):
a) An operator shall maintain Room temperature around machine preferably at 25 °C with air conditioning system or shall arrange for a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 °C .
b) Stabilized Input Voltage of 230 Volt, 50 Hz, 20 Amps, AC Supply must be available for error less performance of the instrument. Use of Servo Controlled Stabilizer is recommended.
Construction |
Double walled |
Inner chamber |
S.S. 304 Grade |
Outer Chamber |
S.S. 304 Grade Mirror polished stainless steel material |
Inner working size |
35X35X35 CM (H X W X D) |
Chamber volume |
42 Ltr. |
Thermal Insulation |
High Density Rock wool Insulation Of 65mm |
Temperature Range |
5 °C Above Ambient to 70 °C |
Temperature Resolution |
0.1 °C |
Temperature Accuracy |
± 0.5°C or better |
Temperature Uniformity |
± 0.2 °C |
Temperature Control |
processor based Auto tune PID Digital Temp Indicator cum Controller |
Display |
LED Display |
Temperature sensor |
High Quality PT-100 Sensor |
Heating source |
Nichrome Heating elements (Sealed & Enclosed heaters) |
Heater watts |
0.25 Kw |
Blower |
For Forced Air circulation |
No. of trays |
1 Nos. |
Observation |
Polycarbonate sheet viewing window |
Door lock |
Ergonomic and secured key lockable door lock |
Electrical |
230 Volt, 15A, 50 Hz, AC Supply |
Overall Dimensions |
535 X 700 X 700 (L X W X D) mm |
Weight (Approx.) |
47 Kg |