CONSTANT TEMPERATURE WATERBATH (HIGH PRECISION)-35X30X17.5-INNER S.S. CHAMBER-

Outer chamber Galvanized Sheet-powder coated, Inner chamber of S.S.304, fully argon welded, 50mm thick Glass wool Insulation, specially designed immersion Heater, Built -in boost for initial heating, Temp. Range Ambient +5 to 99.9°C, Accuracy ± 0.1°C at 37°C & Uniformity ± 0.2°C at 37°C, Stirring achieved  by an efficient, continuously rated, self cooling motor with SS shaft and propeller  of anti-corrosive Material, stirrer fitted on side of the bath is allow obstrrution free usage of working area. Working on 230 V single phase.

Salient Features :

1. Excellent control accuracy and uniformity due to its modular and innovative design.
2. Outer chamber is made from Galvanized Sheet ‑ which is powder coated in attractive shades
3. Inner chamber is fabricated from S.S.304 ‑ Mirror polished material
4. Fully argon welded design
5. 50mm thick Glass wool Insulation is provided between the inner chamber and exterior body to prevent the direct thermal loss
6. Specially designed immersion Heater for heating within the set point temperature
7. ISI marked immersion Heater ‑ U shaped
8. Built ‑ in boost for initial heating
9. Stirring is achieved by an efficient, continuously rated, self cooling motor with SS shaft and propeller of anti ‑ corrosive Material
10. Stirrer is fitted on side of the bath allowing obstruction free usage of working area.
11. Entire instrument Works on 230 Volt, 50 Hz, Single phase, AC Supply

Optional fittings at extra cost :

Low water level control device to cut off the current in case water level falls down the heater level @ Rs. 2500.00

Circulatory Pump to circulate the bath water to external apparatus like Abbe Refractometer or Coiled condenser etc @ Rs. 4500.00