Outer chamber S.S.304 - matt finish, Inner chamber of S.S.304, fully argon welded, 50mm thick Glass wool Insulation, specially designed immersion Heater, Built -in boost for initial heating, Temp. Range Ambient +5 to 99.9°C, Accuracy ± 0.1°C at 37°C & Uniformity ± 0.2°C at 37°C, Stirring achieved by an efficient, continuously rated, self cooling motor with SS shaft and propeller of anti-corrosive Material, stirrer fitted on side of the bath is allow obstruction free usage of working area. Working on 230 V single phase.
Salient Features:
- Rectangular shape water bath
- Double walled construction
- Aesthetically designed
- Compact and easy to clean
- Outer body is made from Stainless Steel S.S. - 304 - Matt Finished.
- Inner chamber is fabricated from S.S. 304 - Mirror polished material
- Fully argon welded construction
- 50mm thick Glass wool Insulation is provided between the inner chamber and exterior body to prevent the direct thermal loss
- Specially designed immersion Heater will be provided for heating within the set point temperature
- Built - in boost heater will be provided for initial heating.
- Motorized stirrer for uniform distribution of water temperature
- Supplied complete with instruction manual
Construction |
Double Walled |
Chamber Dimensions |
45 x 30 x 25 cm (W x D x H) |
Chamber volume |
33.75 Liters |
Exterior body |
Fabricated from S.S. - 304 Material |
Inner chamber |
Fabricated from S.S. - 304 Material |
Insulation |
50 mm thick glass-wool insulation |
Temperature controller |
Microprocessor based Digital temperature controller cum indicator |
Temperature Display |
LED Display |
Temperature Accuracy |
± 0.5 °C |
Temperature Range |
Ambient +5 to 99.9°C |
Temperature sensor |
PT-100 Sensor |
Motorized Stirrer |
For uniform temperature distribution within the chamber |
Lid Material |
Fabricated from S.S. - 304 Material |
Operation on |
230 Volts, 50 Hz, single phase, AC supply |
Weight (Approx) |
42 kg |