INDUSTRIAL OVEN (TRIPLE WALLED)-INNER S.S.-120X90X90 CM-

INDUSTRIAL OVEN (TRIPLE WALLED)-INNER S.S.-120X90X90 CM-

INDUSTRIAL OVEN TRIPLE WALLED-INNER S.S.-120X90X90 CM-
Model No: EIE-104DPSS972

Triple walled , inner chamber of stainless steel , Outer chamber of CRC – powder coated or spray painted , 100mm thick Glass wool insulation, Heaters mounted in preheating chamber at sides of oven, Temp. Control by AUTO TUNING PID DIGITAL Temp. Indicating controller from 50°C - 350°C, provided with forced air circulation arrangement, Working on 440 V AC .

Construction Details:

TRIPLE WALLED, Drier will be of robust construction, built on framed angles and suitably reinforced with angles and sections. The external wall manufactured from 20 SWG thick mild steel sheets. The dryer will be insulated with thick glass wool insulation. The dryer will have a fresh air inlet and an adjustable air outlet with single side opening doors at the front. The doors locked with the help of spring loaded ball latches with suitable pressure. Door lips will have silicon gasket to prevent leakages. The dryer will externally powder coated.


Electrical Heating:

Air inside the dryer will be heated by 'U' tube air heaters each of 2000 watts. The heaters are fitted on the sides of the dryer to facilitate uniform heating. Maximum temperature attained inside the dryer will be 250 degree centigrade and will be indicated by a digital Temp. indicator cum controller fitted on the dryer. Temperature inside the dryer will be controlled by the same unit over full range of heating load.


Air Circulation:

Air inside the dryer will be circulated by heavy duty axial flow fan fitted on shaft of ¾" / ¼" dia. and driven by T.E.F.C. motor. The special design of the drier ensures uniform air circulation, so that there is uniform air current over the entire charge loaded inside the drier. The working of the motor will be indicated by lamps in the control panel.


Control Panel:

Control panel will be fitted on the front of the dryer. It comprises of starter with overload relay, contactor, push buttons, Digital PID Temp. indicator cum Controller, indicating lamps, connectors etc. All components are wired up for connections with an earthing bolt.

Inner working size 120 X 90 X 90 CM (H X W X D)
Chamber volume 972 Liter.
Interior Stainless Steel Material S.S. 304, Thickness 20 SWG
Exterior CRC Powder Coated
No. of trays 5 Nos.
Temperature Accuracy ± 0.5 °C
Temperature Resolution 0.1 °C
Temperature Range Ambient to 350°C
Temperature Control Microprocessor based Auto tune ‑ PID controller
Rating 6 KW
Front door Single Door System in front
Side Mounting Blower with continuous duty motor for better uniformity inside chamber.
Power Required 3 Phase, 50 Hz, 440 Volts supply
INQUIRE NOW
name
company name
Email
Mobile number
product name
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image