LAMINAR AIR FLOW-HORIZONTAL-S.S.304 CONSTRUCTION-4 X 2 X 2 FT.(MINI PLEAT HEPA FILTER)

Model No: EIE-111HS422

Available in SS 304, SS 316, PU coated GI, Melamine laminated wood material, Allows operation in a sterile and particle free condition, continuous flushing of the working area by Unidirectional and HEPA filtered airflow, Cleanliness Level – Class 100, Particle Retention – 0.3 micron and Above, air velocity – 90 FPM ± 20, Noise Level 65 db ± 5, Vibration level 20 micron PP. Illumination 750 - 800 lumen, MINIPLEAT HEPA filters, high efficiency washable, Filters, Magnahelic gauge. Spring suspended DIDW blower at low sound level. SS working surface with curved front. Standard accessories included, Front acrylic door, UV lamp, Castors, Gas inlet cock, power Chord. On site Validation and certification at extra cost, working on 230 V Single phase. Detailed specification as follows:

More Information
Techincal Specification

Salient Features:

Cleanliness : ISO Class 5 as per ISO 14644‑1
Polycarbonate front door
Mini Pleat HEPA Filter‑ separator less (H‑14 rating)

Advantage:

Horizontal Laminar Airflow system allows operation in sterile and particle free conditions because of the continuous flushing of the working area by a unidirectional and Horizontal and ultra filtered airflow assures a full product protection.

Material of construction:

Inner workable chamber and exterior body ‑ both are fabricated from S.S. ‑ 304 grade Stainless material with stain finish

Blower Assembly:

DIDW type blower system, which consists of dynamically & statically balanced aluminum centrifugal impeller driven by an single phase, 1440‑RPM motor, enclosed in an PU coated GI casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct.

Documentation:

Working Manual & Warranty certificate will be provided
Test certificate for HEPA Filter will be provided

The following Tests will be carried‑out at our factory before dispatch and certificates provided, On site Validation and certification at extra cost

Laser Particle Count test to confirm the cleanliness level as per ISO 14644‑1
DOP integrity test for HEPA Filter as per IES‑RP‑CC‑002
Velocity profile for HEPA filter as per IES‑RP‑CC‑002
(∆) Differential pressure measurement to confirm the HEPA filter condition

OPTIONAL ACCESSORIES:

Microprocessor controller with LCD display, indicating down flow velocity, Hour counting of UV Lamp & Motor/ blower and alarm for safe mode door-opening height, Date of HEPA FILTER change. The Microprocessor controller will also switch “off” the UV amp after a pre-set timing, AT EXTRA COST OF $ 800

Cleanliness	ISO Class 5 as per ISO 14644 1
Direction of Flow	Horizontal
Working chamber	4 x 2 x 2 Feet (W x D x H)
Inner chamber	Constructed from stain Finished S.S. 304 Material
Particle retention	0.3 Micron & Above
Noise Level	65 decibel on "A" scale ± 5
Velocity	90 Feet / Minute ± 20
Worktable	By IS 304 Grade Stainless Steel surface
Front door	by 4 mm thick Polycarbonate Folded Type
U V lamp	1½ / 3 Feet, 15 / 30 Watts, Make PHILIPS
Illumination	2/4 Feet, 20/40 Watts, Fluorescent tubes with diffusers
Pressure (P)	Inclined Manometer 0 25 mm range
Other accessories	5/15 Amp power point, Gas inlet & Castor Wheels
Power Supply	230V, Single phase, 50 Hz
HEPA Filter
Media	Ultra clean glass fiber paper imported
Type	Mini Pleat HEPA Filter, Separator less
Retention	0.3 Micron
Efficiency	99.97%
Grade	H14 rating
PRE Filter
Media	Synthetic, non woven polyester fibers
Casing	GI with PU coated frame
Retention	5 Micron & above
Efficiency	95 %