Salient Features :
- Double wall design
- Single chamber for steam and water
- Working chamber made of stainless steel LM 304 grade having 2mm thickness.
- Exterior Body is made of stainless steel LM 304 Grade having 1mm thickness.
- Lid, flange & bottom sheet also made of stainless steel. All joints argon welded.
- Joint less silicon gasket
- Heavy duty industrial flange heater.
- Fully Automatic operation; cycle is commenced by press of START button.
- Initial air purging cycle; at the beginning air is automatically removed from the chamber.
- Microprocessor based Digital Temperature Indicator cum Controller.
- PID Controller Controls temperature/pressure precisely at set value.
- Temperature Controller : Microprocessor based Digital Temperature Indicator cum Controller
- Display : Digital Display
- Temperature Sensor : PT 100
- Pressure range : 15 to 22 PSI, factory set at 15 PSI
- Temperature Range : 121°C to 125 °C
- Temperature Resolution : 0.1 °C
- Temperature Accuracy : ± 0.5 °C
- Working chamber size : 45cm x 75cm (Dia x Height)
- Volume :120 Liters,
- Power : Rating 2 KW
- Operates on : 230V/15A/50 Hz.
- Sterilization timer : In built digital timer; timer can be adjusted as per sterilization load requirement.
- Automatic steam exhaust (Depressurized) at the end of cycle.
- Low water level heater safeguard.
- Low water level cut off
- Safety high pressure release valve.
- Safety high temperature cut off.
- Lid fitting pressure gauge 0 30 PSI, safety spring loaded pressure valve.
- Complete unit is Hydraulically tested at 60 PSI pressure.
- Supplied with Calibration certificate with traceability
- Provided with DQ, IQ, OQ, PQ documentation.
- Validation ports provided for temperature mapping as standard supply. (On customer request)