SAMPLE EXTRACTOR - FOR 100 AND 150MM DIA SPECIMEN

Compliance Standards

ASTM D1559, AASHTO T245, EN 12697, ASTM D6926

Applications:

The extractor is made of mild steel and is screw type vertically operated to extract 4" dia and 6" dia marsal mould sample.

The apparatus shall consist of the following parts and accessories:

1. Base plate of size 300mm x 300mm with a 152.4 mm dia hole at centre.
2. Base plate shall have four legs of 25mm dia and 275 mm height.
3. Top plate with a screw hole of 25 mm dia at centre.
4. Two side rods of 25mm dia and 500 mm long.
5. A screw rod of 25mm dia and 650 mm long.
6. Handle of 25mm dia and 300mm long.
7. 99 mm dia. plunger attached at the bottom of a screw rod.
8. Wight : 45 Kg Approx.