TENSILE TESTING MACHINE-2.5 KN-WITH PC INTERFACE AND SOFTWARE

TENSILE TESTING MACHINE-2.5 KN-WITH PC INTERFACE AND SOFTWARE

Model Number : EIE-PT-115DP250

None


Compliance Standards:
ASTM D882, ASTM D828, ASTM D1938, ASTM D1876, ASTM D638, ASTM F88, ASTM F904, ASTM D2256, ASTM D5034, ASTM D412, ISO 1924, TAPPI T494,

Grips Applications:
GRIPS can be supplied for one of the following applications. Please specify your application at the time of order. A pair of grips will be supplied at extra cost. Please refer to the optional accessories.

Applications:
  • Flexible laminated and formed pouches Or
  • Paper and Paper Kraft Or
  • Yarn/Fabric/Rubber Or
  • Plastic and Polymer testing Or
  • Fine wire testing Or
  • G.I. Wire testing, Brass, Copper, Aluminum fine wire testing Or
  • Vulcanized rubber/Elastomer
Overview:
Computerized Tensile Strength testing machine having capacity of 0‑250 Kgf (2.5 KN) (2500 N). Supplied complete with dedicated PC software program (Optional). Equipped with Ball screw, Induction motor & Motor Drive (for speed variation 10mm‑ 400mm/min) along with encoder to measure the elongation using Pair of Grips.

Salient Features:
  • Floor standing model
  • Aesthetic outer appearance
  • Unique and compact design features
  • Fitted with Microprocessor based PROGRAMMABLE Logical controller
  • Computer interface through USB Drive
  • Equipped with Ball screw for friction less traverse
  • Rotary encoder for high accuracy in elongation
  • Reputed make Induction motor with Dedicated Gear Box and Drive for speed variation and to maintain speed at high torque (at maximum load)
  • Easy to use display unit (controller part) and software
  • In‑built Over Load Safety
  • In‑built Over Travel Safety
  • Auto Reverse facility
  • Auto Break
  • You can get graph for load v/s elongation  (stress v/s strain) and also get a excel sheet with a single click
Protection:
  1. Overload protection for load cell
  2. Over travel of traversing crosshead in both direction
  3. Automatic stopping and return of cross head at original position immediately on breakage/Failure of specimen
  4. Higher traverse speed
  5. Emergency Manual switch for stopping the machine
Software facility (Optional):
  • Specially designed Windows based Graphical Dedicated Software
  • RS 232 interface with WINDOW based software to conduct the test  directly from software itself
  • Can store generated data with corresponding graph
  • Can also store  Yield Load, Yield Extension, Break Load, Break Extension, Max load and Modulus of Elasticity
  • User can export the generated data in various file formats such as i.e. Excel, PDF etc
  • Large Storage capacity (More than 50,000 tests) Depending upon Hard Disk capacity.
  • User can change the design of generated graphs i.e. Line, Doted line, etc facility in graph
  • Graph Grids color combination facility
  • Graph zooming facility
  • Individual graph comparison facility
  • Graph overlapping facility for analysis of material property
  • Auto scaling facility
  • Company logo insertion facility 
  • Software can run various tests and can recall data for any test conducted the in history. (If Saved)
  • Software is Menu Driven for easy navigation.
  • Test reports and graphs directly printed on terminal printer through direct print commands
  • Data and Result Units Selectable
  • User can operate the machine directly from the software itself
Note:
  1. Please specify the test application at the time of order for preparation of the Test Jaws (Grips) accordingly.
  2. Test Jaws/Grips for different applications,  will cost extra. Please refer to the optional accessories section.
  3. User can also utilize this machine for other than here listed ASTM Standards & test applications complying with suggested speed range and load capacity. Please call us for any clarifications.

Type of model

Floor standing model

No. of screws

Single screw mechanism driven through reputed make motor & gearbox

Exterior Body Paint

Powder coated

Vertical Clearance

1000 mm

Display

Digital LCD Display

Capacity

0-250 Kgf (0-2500 N) (2.5 KN)

Load cell

‘S Type’ load cell of reputed make

Least count for load

10 Grams

Least count for elongation

0.01 mm

Results displayed on screen

Load, Elongation values, Testing speed and type of test

Load units

Kg, Newton & KN as per selection

Speed Variations

From 10 mm/min to 400 mm/min

Speed control

Dedicated AC Drive

Motor for speed variations

Reputed make Induction Motor with dedicated gear box

Test jaws

Jaws for Tensile Test of Fabric/Yarn/Lea strength/Fine Wire/G.I. Wire/Plastic/Polymer/Paper

Data port

Available with dedicated PC Software to log, modify and analyze the generated data

Power Supply

230 Volt, 50 Hz, Single Phase, AC Supply

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image