TENSILE TESTING MACHINE-DIGITAL-10 KN-SERVO CONTROLLED SYSTEM

Compliance Standards:

ASTM D882, ASTM D828, ASTM D1938, ASTM D1876, ASTM D638, ASTM F88, ASTM F904, ASTM D2256, ASTM D5034, ASTM D412, ISO 1924, TAPPI T494, 

Applications:

1. Flexible laminated and formed pouches Or
2. Paper and Paper Kraft Or 
3. Yarn/Fabric/Rubber Or 
4. Plastic and Polymer testing Or 
5. Fine wire testing Or 
6. G.I. Wire testing, Brass, Copper, Aluminum fine wire testing Or 
7. Vulcanized rubber/Elastomer

Introduction:

Computerized Tensile testing machine capacity 0‑1000 Kgf (10 KN) (10000 N) with software program and built‑in ball screw operated through precisely controlled SERVO MOTOR & SERVO FEEDBACK LOOP SYSTEM with SERVO DRIVE (for speed variation from 0.01mm/min to 500mm/min) with encoder to measure the elongation. Also supplied with one pair of grip for any of the above listed applications.

Salient Features:

1. Floor standing model
2. Aesthetic outer appearance
3. Unique and compact design features
4. Fitted with Highly précised combination of PLC & HMI System, Servo Motor and Drive System
5. Computer interfacing through RS‑232 USB cable
6. Equipped with Ball screw for friction less traverse
7. Rotary encoder to obtain high accuracy in elongation measurement
8. SERVO MOTOR & DRIVE for various combination of speed variation as per following
9. High Torque at very Low Speed
10. High Torque at High Speed
11. Calibration of entire Machine at Very Low Speed
12. Easy to use display unit and software
13. On screen display of Maximum Load, Breaking Load, Yield Load, Elongation, and speed variations
14. On screen Display of load v/s elongation (stress v/s strain) graph also get a excel sheet with a single click
15. Supplied complete with PLC main unit, 7” colour touch HMI, Single Channel Load cell measurement module, PLC to HMI Communication cable and Dedicated SERVO Gear Box.

Protection:

1. Overload protection for load cell
2. Over travel of traversing crosshead in both direction
3. Automatic stopping and return of cross head at original position immediately on breakage/Failure of specimen
4. Higher traverse speed
5. Emergency Manual switch for stopping the machine

Software facility:

1. Specially designed Windows based Graphical Dedicated Software
2. RS 232 interface with WINDOW based software to conduct the test  directly from software itself
3. Can store generated data with corresponding graph
4. Can also store  Yield Load, Yield Extension, Break Load, Break Extension, Max load and Modulus of Elasticity
5. User can export the generated data in various file formats such as i.e. Excel, PDF etc
6. Large Storage capacity (More than 50,000 tests) Depending upon Hard Disk capacity.
7. User can change the design of generated graphs i.e. Line, Doted line, etc facility in graph
8. Graph Grids color combination facility
9. Graph zooming facility
10. Individual graph comparison facility
11. Graph overlapping facility for analysis of material property
12. Auto scaling facility
13. Company logo insertion facility 
14. Software can run various tests and can recall data for any test conducted the in history. (If Saved)
15. Software is Menu Driven for easy navigation.
16. Test reports and graphs directly printed on terminal printer through direct print commands
17. Data and Result Units Selectable
18. User can operate the machine directly from the software itself 

 Note:

1. Please specify the test application at the time of order for preparation of the Test Jaws (Grips) accordingly.
2. Test jaws will be supplied at extra cost. Please refer to the recommended accessories.
3. User can also utilize this machine for other then here listed ASTM Standards & test applications complying with suggested speed range and load capacity. Please call us for any clarifications.