MOR TESTING MACHINE-500 KGF-UP TO 120 X 120 CM TILES-(ISO 10545-4)-WITH AUTOMATIC PACE RATE CONTROL

Model No: TC-104EL120120

As per IS : 13630 (Part - 6), ISO 10545 (Part-4), with TOUCH SCREEN control panel and automatic pace rate control to control the rate of loading at 1 Newton per mm square per second. Capacity 500 kgf. Least count 0.1 kgf. with adjustable test span to accommodate different size tile specimen up to 120 x 120 cm. Direct reading of MOR value in KN or Kgf. Working on 230 V AC single Phase 60 Hz. PC connectivity with software available at extra cost Detailed Specification as per following page.

Compliance with following international standards:

IS : 13630 (Part - 6), ISO 10545 (Part-4)

Introduction:

Electro-Mechanical Design, quite and vibration free operation, Rate of loading controlled through AC drive.
Capacity : 500 kgf
Least Count : 0.1 Kgf
Accuracy : 0.2% of Full Scale

Salient Features:

Standard Digital Model with Load Cell
Suitable for fired sample test on the same machine
Suitable for MOR Test of Ceramic Tiles / Bars as per IS0 : 10545 (Part-4) and IS : 13630
Direct reading possible for different shapes of tiles (Square, Rectangular and Round)
Direct Display of Load / Collapsing Force
Selectable Test Units - Kg, KN
Auto-stop upon completion of Test.
Provision for emergency switch in case, if user wants to stop the load applicator at certain height
With LCD Display digital control panel.
INTERGERATED AC INDUCTION MOTOR WITH DRIVE to control rate of Loading.
With special guard to protect the operator against Ceramic splinters
With 2 Rubber Lined rollers of 30 mm diameter
With adjustable Test Span
With Auto-Calibration facility using standard Cast Iron Weights and standard code (Weights will not be supplied with the machine)
Complete Unit is powder coated in attractive shades
Operation on 230 Volt, 50 Hz, Single Phase, AC Supply

Support Rod and Central Load Applicator

02 Nos. cylindrical support rods and 01 central load applicator rod covered with rubber
One cylindrical support rod is slightly pivotable
Other cylindrical support rod is slightly rotatable about its own axis.
Diameter of all Metal rods : 20 ± 1 mm
Thickness of rubber : 5 ± 1 mm
Hardness of rubber : 50 ± 1 mm

Supplied with MOR Software (Optional accessories):

PC Software to log & Modify the generated date
Two way communication with the machine
Direct reading of MOR value and Breaking strength in excel format
Reading can be saved and printed from the computer
Connection through RS-232 port
User can start/stop the machine form the computer
User can enter Batch no, Date, Time, Dimensions of the test samples for report purpose
User can enter company LOGO for report generation
Can export the generated report in PDF, EXCEL, WORD Format.

Note : 3 KVR servo controlled stabilizer is recommended

Design	Electro-Mechanical
Operation	Quiet and Vibration free
Controlling System	AC Variable Frequency Drive with AC Induction Motor
Load cell Capacity	500 kgf (5 KN)
Least count for load	100 grams
Load resolution	0.1 kg
Motor Speed Control	Through AC Drive
Test units	KG, KN Selectable
Accuracy	0.2% of full scale
Can accommodate	Maximum tile size of 1200 x 1200 mm (120 x 120 cm)
Display	4" touchable screen display.
Construction	Mild steel body
Paint	Powder coating
Power Supply	230 volts, 50 hz, single phase, AC Supply