.png)
.jpg)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
Job Application
Introductions:
Microprocessor Flame Photometer (2F)with Sodium (Na) & Potassium (K) filters, upto 5 point calibration, direct readout in ppm & meq/l, auto filter section, auto ignition, 20 x 4 line LCD display, Single Aspiration,RS232 interface PC software at other accessories for lab
Salient features:
- Microprocessor Based with Printer Interface
- Four Measurements in Single Aspiration
- Setup Storage Facility
- Sample Data Storage Facility
- Curve Calibration Programmability Using Maximum of 5 Standards
- Multiple Calibration Curve Saving Facility
- Data Processing Through Curve Fitting Techniques, Least Square, Quadratic
- Online Help Key
- Direct Results in ppm and meq
- Useful for Medical & Soil Testing
Pre-installation requireements :
We request to you make necessary arrangement of prerequisites LPG gas cylinder with regulator, double distilled water, NACL LR grade, KCL LR grade, NA standard solution (Minimum 5 solution Viz. 2 ppm, 4 ppm, 6 ppm, 10 ppm or as per requirement) and K standard solution (Minimum One Viz. 10 ppm or as per requirement), power supply 230 volt, 50 Hz 25 Amp power plug to carry out the demonstration at your site
|
General range |
Na : 0-100 ppm, K : 0-100 ppm, Ca : 0-100 ppm, Li : 0-100 ppm |
|
Sensitivity General |
Na: 0.5 ppm, K : 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm |
|
Filters |
Na & K supplied (Ca & Li are optional at extra cost) |
|
Resolution |
0.1 ppm |
|
Reproducibility |
< 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as maximum standard |
|
Linearity |
2% error when 3 ppm Na/K and 5 ppm Li are set as maximum standard Curve Fit |
|
Accuracy |
± 2% of FS |
|
Display |
20 x 4 alphanumeric LCD with backlit |
|
Average Time |
In-built in software |
|
Flame System |
LPG and dry oil free air |
|
Detector |
Silicon photodiode |
|
Calibration |
Up to 5-Point calibration with curve fitting software |
|
Gas Control |
Adjustable with knobs |
|
Ignition System |
Auto ignition |
|
automiser |
Axial flow type |
|
Printer |
Provision for attachment of dot matrix printer or HP LaserJet / inkjet (non-windows) printers with centronics parallel interface |
|
RS-232C |
Available (PC software at extra cost) |
|
Power |
230 V + 10% AC, 50 Hz |
|
Dimensions |
365 x 245 x 220 mm (L x B x H) (Approx.) |
|
Weight |
Main Unit 9 Kg (Approximately) |
|
Optional Accessories At Extra Cost |
|
|
Additional filter calcium (Ca), Lithium (Li) can be provided |
Rs. 9000.00 Each. |
|
Barium (Ba) Filter |
Rs. 13800.00 Each. |
|
RS 232 Professional PC Software for computer Interface |
Rs. 21000.00 |
