.png)
.jpg)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
Job Application
Complies with International Standards:
IS : 13630 (Part - 2), ISO : 10545 (Part-3) , IS 2556
Purpose:
For water absorption test of ceramic tiles. The tiles will be placed vertically in the slots provided to conduct the water absorption characteristic test.
Note:
Also Need To Have Following Instruments To Complete The Test Procedure (WILL BE SUPPLIED AT EXTRA COST)
- Desiccator
- Silica gel
- Hot air oven
- Electronic balance (5 kg x 1 gm)
|
Construction |
Double walled in construction |
|
Inner chamber |
Mirror polished Stainless Steel material S.S. - 304 Grade |
|
Exterior body |
Mild steel material |
|
Paint |
Powder coated in attractive shades |
|
Lid of the bath |
Matt finished Stainless Steel material S.S. - 304 Grade |
|
Insulation |
Glass wool insulation for minimum heat loss |
|
Temp Range |
5 °C above ambient to 100 °C |
|
Temp control |
Microprocessor based Auto-Tune PID Digital Temp Indicator cum controller |
|
Temp, Accuracy |
± 0.5 °C |
|
Temp. Sensor |
PT-100 Sensor |
|
Stirrer |
High speed stirrer for uniform temp distribution |
|
Stirrer Motor |
Electric motor of 1/20 HP |
|
MOC of Stirrer shaft |
Anti - corrosive Material |
|
MOC of Propeller |
Anti - corrosive Material |
|
Heating elements |
04 KW |
|
Can accommodate |
Test specimen up to 300 X 300 mm (AS PER BIS 13630-2 & ISO 10545-3 Standard) |
|
Operation on |
230 Volts, 50 Hz, Single Phase, AC Supply |
|
Supplied with |
Vertical stand made from strong S.S. rod to place 20 x 20 cm ceramic tiles. Stand will be removable |
|
Stirrer is fitted on side of the bath, which allows obstruction free usage of working area. |
|
|
Overall Dimensions |
970 X 630 X 710(L X W X D) mm |
