SAYBOLT VISCOMETER-WITH TWO SAYBOLT TUBES-

Complies with IS:3117-2019/ ASTM D88

The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60 ml sample to flow through a tube with a specified diameter (furol or universal) is measured and reported in seconds. The viscometer can be used for temperatures between 25 and 50 °C.The viscometer includes waterbath, motorized stirrer, electric heater with digital temp.controller with control accuracy of ± 0.1°C. (The room temp. must be @ 20-21°C to achieve control accuracy)

Construction Details: 

1. The apparatus consists of stainless steel bath with two sample cups
2. The bath has a lid which contains a thermometer socket and a straight heater. 
3. Temperature is controlled by PID Digital Temperature indicator cum controller
4. Stirring is done by FHP motorized stirrer. 
5. A thermometer can be inserted into the cup cover to cross check the Digital controller. 
6. Two jets - one universal and one furol can be screwed to the cup by a handle. 
7. Entire assembly works on 220 Volt, 50 hz, Single phase, AC Supply
8. Universal Orifice: 2 pc
9. Furol Orifice : 2 pc
10. Thermometer Support: 2 pc
11. Tube wrench : 1 set
12. Saybolt viscosity flask, glass, 60 ml: 2 pc
13. Stopper : 2 pcs
14. Operation Instruction Manual & Conformity Certificate : 1 Pc

The Following accessories are available at extra cost

1. ASTM/IP Glass Thermometers
2. Digital Stop Watch (essential accessory)
3. Withdrawal Tube
4. Strainer for Filtering