The analog compression testing machine has been designed to meet the need for a simple and economic means to test concrete for its compressive strength.
LOADING UNIT:
The loading unit consists of a cross-head and base with solid channel supports connecting the base and cross-head firmly.
The Hydraulic jack is fixed to the base. The platen of the machine are hardened ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens. Platen is adjustable with adjusting screw.
The Complete unit comprises a Loading Unit which is of Solid channel welded construction, having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 1000 KN.
The pump facilitates rapid approach of the platens for daylight closure and also provides Manual control over the application of load. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch.
NOTE : Use of 3 KVA Three Phase Servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty void in case of any damage due to power fluctuations.
Type of Pumping |
Electrical |
Loading Range |
1000 KN |
Least count |
5 KN |
Reading has to be observed on pressure gauge |
|
Pressure gauge is equipped with two pointer, black and red. Red pointed will be hold at the failure load. |
|
Ram dia |
165 mm |
Ram Travel in mm |
50 mm |
Platen dia |
200 mm |
Horizontal clearance: |
250 mm |
Vertical daylight in mm |
300 mm |
Overload Protection |
|
Overall Dimensions |
Load Frame : 455 x 395 x 850 mm |
Overall Dimensions |
Panel : 250 x 470 x 790 mm |