MARSHAL STABILITY TESTING MACHINE-DIGITAL-4

MARSHAL STABILITY TESTING MACHINE-DIGITAL-4" & 6" DIA-COMBINED - TM-041UD

Model Number : TM-041UD



Compliance Standards


ASTM D6927, ASTM D1559




Salient Features


Alphanumeric 4 line display indicating: Load, displacement, status, peak value of flow and Load.

Digital display to measure the load up to 10000 Kg /100 KN, Least Count 0.1 kg/0.001KN

Displacement resolution: 0.01mm

Load and displacement both at the single screen. No need for the flow meter and Proving ring.

Only one person needed for test

Hassle free operation, no need of TARE.

Load cell can also be calibrated using standard reference

Panel cut out size 92 x 188 mms.

Facility to read in Kg as well as KN

Peak hold facility to read load and flow value until reset

Auto cutoff at the pre decided load.

With safety cut off on lower and upper limit

Auto internal calibration facility.(external calibration has to be done after a year)

Backlight in the indicator to observe the reading clearly even in the dark.

Auto reverse on completion of test

Fully powder coated in 2 tone color for aesthetic finish

With PC/printer interface with software for direct printout of calculated results (at extra cost)

With following accessories


Marshal Mould, cylindrical 4" diameter : 03 Nos.

Base plate for 4" diameter : 03 Nos.

Collars 4.1/8" diameter : 03 Nos.

Marshal Compaction hammer, 4.5kg weight and 45.7cm drop : 02 Nos.

Specimen extractor for 4" diameter : 01 No.

Compaction pedestal with specimen holder for 4" diameter : 01 No.

Breaking head assembly, complete with gauge disc and flow meter pedestal for 4" diameter : 01 No.

Load transfer bar for 4" diameter : 01 No.

Marshal Mould, cylindrical 6" dia.: 3 Nos.

Base plate: 3 Nos.

Collars 6.1/8" dia.: 3 Nos.

Marshal Compaction hammer, 10.2kg weight and 45.7cm drop: 2 Nos.

Specimen extractor plate for 6" and 4" dia : 1 No. (Frame type sample extractor available at extra cost)

Compaction pedestal complete with specimen holder for 6" dia Mould: 1 No.

Breaking head assembly, complete with gauge disc and flow meter pedestal for 6" dia Mould : 1 No.

Load transfer bar for 6" diameter : 1 No.

100 KN Capacity Loading Unit motorized with uniform vertical movement of 5.08cm/min. Suitable for operation on 230 volts AC supply: 1 No.



Optional Accessories At Extra Cost


RS 232 interface with software with following features @


Direct analytical reports on computer

Auto generation of load/time graph.

Auto calculation of average of 3 readings for flow and load

Two way communication facility ‑ Can operate the machine through PC

Name of Issuing Lab and customer name can be inserted

Auto date and time of testing

Transfer of result to PC automatically



Essential Instruments Available at extra cost




Filter Paper - Pack of 100 circles

Electronic Weighing Balance

Automatic Marshal Mould compactor with Digital Counter

Constant Temperature Waterbath with Digital Temp. display

Sample extractor - Hydraulic or Mechanical



Note


Use of 1 KVA single phase servo controlled stabilizer is essential to protect the machine against voltage fluctuations.

Warranty voids in case of any damage due to power fluctuation.

Data and design subject to change due to continuous R&D

Click here for working video : https://www.youtube.com/watch?v=kzN7eFYgfZ8&t=170s

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image