Complies with following International Standards :
IP 154, IS 1448 (P‑15), ASTM D130
Technical Specifications of Bath:
- Compact and unique design
- Aesthetical exterior appearance
- Double walled water bath
- Inner chamber is made of mirror polished - Stainless steel 304 grade material
- Exterior body is fabricated from Mild steel material, which is powder coated in attractive shades.
- 65 mm thick GLASS WOOL insulation to prevent thermal heat loss.
- Temperature is controlled by Micro-Processor Based Digital PID Temperature Controller
- Operating temperature: 5 °C above ambient to 100 °C
- Temperature resolution: 0.1 °C
- Temperature control accuracy: ± 0.5 °C
- Immersion Heaters are of stainless steel material, which are fitted within the chamber
- Heaters are designed such that they have Long life and high safety zone
- Stirring is accompanied by stainless steel stirrer with peddle which will cause the uniform temperature distribution throughout the chamber.
- Bath is designed for 4 test positions, with lid having hooks for suspending bombs. (1 No. Bomb supplied, additional at extra cost)
Supplied with following accessories:
- S.S. BOMB (Copper Corrosion test vessel, stainless steel with O rings, screw type cap, for use up to 100 psi)- 01 No
- Laminated Indian Color chart - 01 No
- Copper Strips - 75 mm long x 1.5-3.0 mm thick x 12.5 mm wide - 03 Nos
- Test tube - 25mm O.D. X 150mm Length - Capacity 55 ml - with RIM - ASTM D130 - 03 Nos
- Glass Thermometer - (-20°C to 102°C x 0.2°C) Density Wide Range - (ASTM 12C / IP 64C) - 01 No
Essential accessories at Extra Cost:
- ASTM Color Chart For Copper Strip Corrosion Test
- Bench top vice to hold up to 6 strips for polishing
- Test Tube stand, to hold 3 test tubes of 25 mm diameter & height 150 mm.
- Silicon Carbide Paper, grade 100/150/240.
- Silicon Carbide Powder, 150 mesh, 1 kg.
Note:
Please refer to the essential accessories cost for performing the experiment thoroughly as per ASTM Standard.