Compliance with following International Standards
ASTM D217, ASTM D4950, IP 50
Apparatus descriptions
- Motorized grease working machine with Single Cup for short duration "worked penetration tests" on lubricating greases.
- Consists of one steel ASTM grease worker with drive motor mounted on a sturdy steel base.
- Spring loaded tightening clamps hold grease worker securely on base
- A grease working assembly comprises a heavy duty grease pot with screw lid.
- A plunger passes through the lid and is attached to a perforated metal Worker Plate.
- A large bore grease‑cock allows excess air/grease to escape during assembly and insertion of a thermometer
- The plungers is driven by a geared electric motor at 60 ± 10 strokes per minute.
- An automatic counter will stop the motor after a pre‑set number of strokes up to a maximum of 999,999.
- The safety guard incorporates a motor cut‑off switch.
- Equipped with a presetting electronic counter
- Threaded cup and cover
- Base plate is drilled at corners to allow for bolting to table top.
- Operates on 230 Volt, 50 Hz, Single Phase, AC Supply
Click here for working video : https://www.youtube.com/watch?v=x9A01ZTn5_4&t=115s
Worker Plate |
51 x 1/4 inch holes (Optional Churn Plate 270 x 1/16 inch holes) |
Grease Pot |
1 x Brass (Optional Stainless Steel) |
Size (H x W x D) |
(40 x 30 x 50) Cm |
Weight |
25 kg |
Power |
450 Watt |
Voltage |
220/240V, 50 Hz, Single Phase, AC Supply |