BOMB CALORIMETER - AUTO CALCULATION WITH A4 SIZE EPSON PRINTER

Model No: EIE-220A4EP

As per IS:1448(Part 6) / IS:1350 (Part 2). It is used for determination of calorific value of liquid & Solid fuels. The Instrument consists S.S. Bomb (Decomposition body) Body made out of corrosion resisting stainless steel Rod cap. 300 ml, Calorimeter vessel, outer Jacket with insulated Body, offset stirrer, S.S. Crucible, pellet press, ignition wire, pressure gauge, with flexible pipes. with electronic firing unit. Resolution 0.01°C. All the process up to firing the sample is MANUAL but GCV calculation is AUTOMATIC. with A4 size dot matrix Printer. Supplied with a printer. Detailed description provided in technical section.

More Information
Accessories

As per IS:1448(Part 6) / IS:1350 (Part 2).

The system will consist of the following parts and standard accessories along with instruction manual.

Calorimeter vessel with bomb support & insulating base - 01
Water Jacket - 01
Combined lid for calorimeter vessel & water jacket - 01
Stirrer - 01 set
Connecting lead for calorimeter bomb - 01 set
Fine adjustment valve with built in pressure gauge - 01
Connecting tube to connect bomb, pressure gauge and fine regulating valve - 01
Safety Relief Valve fitted on gas filling tube adapter - 01
Pellet Press - 01
Spanner for Oxygen tube connection - 01
Ignition Wire - Nichrome - 01 Roll of 5 meter
Cotton Thread - 01 Roll
Stand for Bomb Lid - 01
Hook for Lifting Bomb - 01
Crucible SS - 01
Gas Release Valve - 01
Bomb Firing Unit - 01 Set
Differential Type Digital Thermometer complete with sensor -01 No
O-ring for bomb & valve - 01 set each
Schrader Valve with Key - 01 each
Standard Benzoic Acid - 01 Bottle

Salient Features of Microprocessor based controller

Eliminates manual calculations
Microprocessor based controller executes automatic calculations of Calorific Value
Results can be printed on PRINTER.
Automatic measurement and calculation of CALORIFIC VALUE / WATER EQUIVALENT
Inbuilt RTC (Real Time Clock) which makes note of time and date of test.
DOT MATRIX printer interface for printing the final result.
DOT MATRIX printer Printout Report Format for SAMPLE TEST
TYPE OF TEST : SAMPLE TEST
MAX. TEMPERATURE RISE
MASS OF TABLET
WATER EQUIVALENT
FINAL CALCULATED CALORIFIC VALUE
DATE & TIME OF TEST
DOT MATRIX Printout Report Format for Water Equivalent Test
TYPE OF TEST : WATER EQUIVALENT TEST
MAX. TEMPERATURE RISE
MASS OF TABLET
BENZOIC ACID CALORIFIC VALUE
FINAL CALCULATED WATER EQUIVALENT
DATE & TIME OF TEST
Automatic measurement and mathematical calculation of the calorific value/Water Equivalent; which eliminates the requirement of operator to be continuously present to note the maximum temperature rise & to do the calculations manually.
Weight of tablet feed able through keypad by user.
Water equivalent settable through keypad by user.
Automatic calculation for Sample Test or Water Equivalent Test from maximum temperature rise value.
Full test report printout with date and time .
Sensor open detection.
Fuse wire open detection.
User friendly system handling messages on LED
Type of test selectable
Resolution of 0.001°C can be provided at extra cost @ Rs. 40,000.00

Pre-Installation Requirements for all Bomb Calorimeters to be arranged by you:

Digital Top Pan Balance (0.0001 gm.)
2 KVA UPS with Batteries (30 min backup).
RO (50 liter) approx.
Oxygen Cylinder 99.9% Purity (47L, minimum 70 kg/cm2 pressure).
Clean Dust Free Room, Solid vibration free working table away from windows, ovens and other heat generating source.
Any others consumable etc.

Consumables (Suggested to purchase in sufficient quantity)