ORBITAL SHAKING INCUBATOR -HEATING-250 ML X 9 FLASK-

ORBITAL SHAKING INCUBATOR -HEATING-250 ML X 9 FLASK-

ORBITAL SHAKING INCUBATOR-HEATING-250 ML X 9 FLASK-
Model No: EIE-203DPH2509

Double walled, Inner chamber made of S.S.304, Outer made of CRC sheet - powder coated, Temp. Range from 5°C above ambient to 70°C. Temp.resolution 0.1°C, Temp.control accuracy 1°C, PMDC Motor with thyristor drive, Interior illumination with glass viewing window, Shaking speed from 50-250 RPM, equipped with Digital RPM Indicator, Digital Timer, Digital Temp.controller to work on 230 V AC Single Phase.

Double walled, Inner chamber made of S.S.304, Outer made of CRC sheet - powder coated, Temp. Range from 5°C above ambient to 70°C. Temp.resolution 0.1°C, Temp.control accuracy 1°C, PMDC Motor with thyristor drive, Interior illumination with Poly-carbonate transparent viewing window, Shaking speed from 50-250 RPM, equipped with Digital RPM Indicator, Digital Timer, Digital Temp.controller to work on 230 V AC Single Phase.


Salient Features:

  1. Exterior body is fabricated from Mild Steel Material, which is powder coated in attractive shades.
  2. Interior chamber is fabricated from Mirror polished Stainless Steel S.S. ‑ 304
  3. Outer double walled metal door with sponge ‑ type silicon gasket for air‑tight sealing
  4. Electrical wiring as per CE Compliances
  5. Chamber illumination is accomplished by Fluorescent light with door switch.
  6. Cord wire duly tested and inspected with stress factor as per CE standard
  7. Electric Motor located at the back side of unit, which is protected with safety cover to avoid accident
  8. User friendly and tactfully designed chamber door and locking mechanism
  9. Aesthetic outer appearance and high quality
  10. Interchangeable S.S. tray with spring loaded S.S. Lotus clamps (Supplied without flasks)
  11. Supplied complete with Digital Timer


Heating System:

Long lasting U‑Shaped tubular heaters used as heating element.


Pre - installation mandatory requirement: (Guarantee void in case of noncompliance):

  1. An operator shall maintain Room temperature around machine preferably at 25 °C with air conditioning system or shall arrange for a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 °C
  2. Stabilized Input Voltage of 230 Volt, 50 Hz, 20 Amps, AC Supply must be available for error less performance of the instrument. Use of Servo Controlled Stabilizer is recommended.
Construction Double walled
Interior S.S. 304 Grade mirror polished Stainless steel material
Exterior CRC Powder Coated
Thermal Insulation Rockwool Slab insulation to avoid thermal loss
Insulation thickness 75 mm
Temperature Range 35 °C to 70 °C
Temperature Resolution 0.1 °C
Temperature Accuracy ± 1°C
Temperature Uniformity ± 2.5°C
Temperature Control Micro processor based Auto tune PID Controller
Temperature Display LED Display
Temperature sensor High quality PT-100 Sensor
Illumination Fluorescent Tube light (Make : GELCO)
Fluorescent light watts 11 Watts
Heating source U shaped S.S. Tubular heaters
Shaking Achieved by PMDC motor with DC Drive
Motor RPM 50-250 RPM (Shaking speed)
Motor speed display Digital RPM Indicator (Shaking speed display)
Speed control By Rotary Potentiometer
Shaking racks 9 flasks of 250 ml
Shaking racks material Manufactured from polished S.S. 304 Grade
Blower Forced Air circulation for uniform temperature distribution
Observation Inner transparent poly-carbonate door for quick viewing and retrieval
Door lock Ergonomic and secured key lockable door lock
Feet On Castor wheels (For easy mobility)
Electrical 230 Volt, 15A, 50 Hz, AC Supply
Overall Dimensions 675 X 625 X 1160 (L X W X H) mm

INQUIRE NOW
name
company name
Email
Mobile number
product name
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image