.png)
.jpg)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
Job Application
Ductility Mould with base plate for casting:
Compliance with following International Standards:
IS:1208‑1978 (FIG.1)
Construction Details:
Made of brass/Gunmetal with the shape, dimensions and tolerances as shown in fig.1 of IS: 1208‑1978. The ends b & b' are known as clips, and the parts a & a`, as sides of the mould. The dimension of the mould will be such that when properly assembled, it will form a briquette specimen having the following dimensions.
- Total Length = 75 +/‑ 0.5mm
- Distance between clips = 30 +/‑ 0.3mm
- Width of mouth of clips = 20 +/‑ 0.2mm
- Width of minimum cross = 10 +/‑ 0.1mm
- Section C half way between clips)
- Thickness Arrangement = 10 +/‑ 0.1m
