NABL Accredited Calibration Laboratory
LAMINAR AIR FLOW-HORIZONTAL-G.I. WITH PU COATING-(TABLE S.S. 304)-(4 X 2 X 2 FT)-(MINI PLEAT HEPA FILTER)

LAMINAR AIR FLOW-HORIZONTAL-G.I. WITH PU COATING-(TABLE S.S. 304)-(4 X 2 X 2 FT)-(MINI PLEAT HEPA FILTER)

Model Number : EIE-111HP4

LAMINAR AIR FLOW TYPE

Salient Features

  1. Cleanliness : ISO Class 5 as per ISO 14644‑1
  2. S.S.304 work table
  3. Polycarbonate front door
  4. Mini Pleat HEPA Filter‑ separator less (H‑14 rating)

 

Technical Specifications

•Direction of Flow: Horizontal
•Velocity: 90 FPM ± 20%
•HEPA Filter: 4` X 2` (1 No.)
•Particle retention: Above 0.3 micron.
•Blower Assembly: 1/6 HP, 1440 RPM
•Noise Level: 65 decibel ± 5%
•Rate of air flow: 0.40 to 0.75 M/Seconds (90 FPM)
•Vibration level: < 2.5 micron


Minipleat HEPA filter (H 14 RATING)

Particle retention will be 0.3 micron at rated velocity, Pressure drop will be 23 mm WG, Efficiency 99.997%. Protected with specially perforated SS grill at the downstream side.


Pre filter

Pre‑Filter size will be dependent on the size selected. Particle retention down to 5 micron at rated velocity, Pressure drop 6 mm WG, Efficiency 95 % Protected with specially perforated SS grill.

 

Blower assembly

Consists of a 1/6 HP,1440 RPM, single phase Motor with double end shaft and a pair of aluminum centrifugal type impeller directly coupled on both ends of the motor & encased within an MS blower housing.


Material of construction

The complete LAMINAR AIR FLOW BENCH will be fabricated by using Powder coated 18 SWG CRC sheet with square pipes. Front door made of 4 mm clear polycarbonate, with double folding facility. Working table will be of complete stainless steel (S.S.304). Ultra violet lamp of 3 feet 30 watts‑Philips‑ Holland make will be provided.

 

Standard accessories

The equipment will be provided with LED LIGHT FITTING, Gas cock, castor wheels, Inclined Manometer, additional 5 amps power point, side screens made of 4 mm polycarbonate.