HIGH TEMP. FURNACE-18" X 9" X 9"-1400°C-DIGITAL

Construction Details:

1. Aesthetic exterior appearance
2. Fabricated from Mild Steel Material  
3. Box type fabrication in a composite assembly of two sections 
4. Powder coated in attractive shades.
5. The heating cavity is located on the left of the assembly, while the control panel with electrical wiring is positioned on the right.

Refractory:

1. Internal refractory lining made of High Alumina material.
2. Ceramic fiber insulation of different grades.

Heating Element:

Furnace is Equipped with Matched set of Silicon Carbide Heating Elements, which are horizontally mounted, radiate directly on both sides of the Heating Cavity to derive symmetrical heat distribution.

HEATING SYSTEM:

1. Heating Elements : Silicon carbide rood (6 numbers with even Distribution) Element is Two Side left & Right
2. Type of element : Solid type
3. Hot zone length : 200 mm
4. Total length of element : 650mm
5. Outer Diameter : 18 MM   
6. Resistance of the element : 1.74 ohms
7. Operation : Three phase
8. Power : 9 kW line load
9. Working temperature : 1350 C (For continuous operation) 4-6 hours
10. Electrical line requirement : 100 A - MCB (Three phase with neutral) has to be arranged by the customer

Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost. Price on request.



CONTROL SYSTEM:

1. Temperature control : Digital Temperature controller will be a PID automatic control Power control
2. Temperature sensor : Pt+Rh13%/Pt - 'R' type thermocouple along With Recrystallized alumina beads and Sheath
3. Power control: MCB Mains
4. Indications: a) Amp meter b) pilot indicating light C) Mains Indicator d) Output Indicator
5. Control switches : Mains on, out put on
6. Safety Control : Over heat safety cut-off of safety controller provided

Optional Accessories (at extra cost)

1. Hour Meter
2. Over temp. protection with audio alarm
3. Data Logger blind - Multi point recorder with software
4. Safety door switch
5. Programmable Temp. controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)