Detailed Specification as follows.
Salient Features
- Horizontal Design
- Front loading type
- Improved model
- Ceramic fiber wool insulation instead of brick insulation
- Ceramic fiber wool insulation results in weight and size reduction of furnace
- The weight and size of the furnace is 1/4th times and 30% lesser respectively as compared to brick furnace.
- The heat up time is less
- Heat loss is very low‑resulting in power saving
Vent Port
Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.
Calibration port
Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment
Standard Fittings supplied with the instrument
- Compensating cable
- Indicating lamps
- Indian Standard Power plug & cord
Maximum Temperature |
900°C |
Working Temperature |
850 °C |
Temperature Accuracy |
± 5 °C |
Temperature Resolution |
1 °C |
Inner working size |
12" x 6" x 6" (300 mm D x 150 mm W x 150 mm H) |
Outer Size |
24" x 20" x 25" (600 mm D x 500 mm W x 625 mm H) |
Chamber volume |
8 liters |
Temperature sensor |
K- type sensor |
Rating |
3.0 KW |
Temperature Control |
Dual display microprocessor based Digital temperature indicator cum controller |
Construction |
Exterior body made of S.S.304 |
Insulation |
Ceramic fiber wool insulation |
Heating |
KANTHAL wire in coil form wound on the muffle, embedded in high grade refractory cement |
Circuit Wiring |
As per CE Norms |
Operation on |
220/230 Volts, Single phase, AC Supply |
Overall Dimensions |
510 X 805 X 740(L X W X D) mm |
Weight (Approx.) |
84 Kg |