Detailed Specification as follows:
Salient Features :
- Horizontal, front loading type
- Improved model
- Exterior body made of Stainless Steel ‑ S.S. 304 Grade
- Ceramic fiber wool insulation (instead of brick insulation)
- Ceramic fiber wool insulation results in weight and size reduction of furnace.
- The weight and size of the furnace is (1/4 times )and 30% less respectively as compared to brick furnace.
- The heat up time is less
- Heat loss is very low‑resulting in power saving
- Supplied with calibration certificate for Digital temperature controller cum indicator
- Supplied complete with IQ, OQ, PQ Documentation and instruction manual
Vent Port :
Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.
Calibration port (If required by indenter) :
Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment
Safety Features :
Thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition.
Standard Fittings supplied with the instrument :
- Compensating cable
- Indicating lamps
- Indian Standard Power plug & cord
Optional Accessories (at extra cost)
- Hour Meter
- Over temp.protection with audio alarm
- On site Validation services
- Data Logger blind - Multi point recorder with software
- Safety door switch
- Programmable Temp.controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)
Note : The heating coils of the furnace are warranted for 1000 working hours or 12 Months whichever earlier from the date of usage.
Maximum Temperature |
1200°C |
Working Temperature |
1150 °C |
Temperature Accuracy |
± 1 °C |
Temperature Resolution |
± 1 °C |
Inner working size |
12" x 06" x 06" (300 mm D x 150 mm W x 150 mm H) |
Chamber volume |
8 liters |
Temperature sensor |
K type sensor (Thermocouple) |
Rating |
5.0 KW |
Temperature Control |
Dual display microprocessor based AUTOT TUNE Digital PID temperature indicator cum controller |
Construction |
Exterior body made of Stainless Steel Material - S.S. 304 Grade |
Insulation |
Ceramic fiber wool insulation |
Heating |
KANTHAL A 1 wire in coil form placed in the Elements ribs & easily replaceable |
Circuit Wiring |
As per CE Norms |
Operation on |
220/230 Volts, Single phase, AC Supply |
Overall Dimensions |
508 X 812 X 762 ( L X W X H ) MM |
Weight (Approx.) |
86.250 KG |