REFRACTORY FURNACE - 9" X 4" X 4"-1200°C

Detailed Specification as follows:

Salient Features :

1. Horizontal, front loading type
2. Improved model
3. Exterior body made of Stainless Steel ‑ S.S. 304 Grade
4. Ceramic fiber wool insulation (instead of brick insulation)
5. Ceramic fiber wool insulation results in weight and size reduction of furnace.
6. The weight and size of the furnace is (1/4 times )and 30% less respectively as compared to brick furnace.
7. The heat up time is less
8. Heat loss is very low‑resulting in power saving
9. Supplied with calibration certificate for Digital temperature controller cum indicator
10. Supplied complete with IQ, OQ, PQ Documentation and instruction manual

Vent Port :

Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.

Calibration port (If required by indenter) :

Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment

Safety Features :

Thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition.

Standard Fittings supplied with the instrument :

1. Compensating cable
2. Indicating lamps
3. Indian Standard Power plug & cord

Optional Accessories

1. Hour Meter
2. Over temp.protection with audio alarm
3. On site Validation services
4. Data Logger blind - Multi point recorder with software
5. Safety door switch
6. Programmable Temp.controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)

Note : The heating coils of the furnace are warranted for 1000 working hours or 12 Months whichever earlier from the date of usage.