COMPRESSION TESTING MACHINE - 1000 KN-AUTOMATIC PACE RATE CONTROLLED

COMPRESSION TESTING MACHINE - 1000 KN-AUTOMATIC PACE RATE CONTROLLED

Model Number : TM-042AC.1000.0

None


Compliance With Following International Standards:

  1. EN 12390‑4, ASTM C39, AASHTO T22, IS : 14858 (2000)


Automatic Test Execution:

  1. Once the machine has been switched on, the specimen positioned and centered, the only required operations are


Set test parameters ‑ including load rate:

  1. Press the start button
  2. Tighten the pressure valve
  3. The machine automatically: starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically stops the motor upon specimen failure
  4. Release the pressure valve
  5. The test execution conforming to Standards can be easily proved.
  6. Working on 240V, 50‑60Hz, single phase.
  7. Dual stage pump assuring fast piston approach and precise test execution
  8. Test execution conforming to EN 12390‑4, ASTM C39, AASHTO T22
  9. Controllable pace rate from 1 KN/Sec to 10 KN/Sec.
  10. Auto stop after completion of each test.
  11. Soft platen‑to‑specimen contact and smooth load rate control from the very beginning of the ramp


Frame:

  1. Four column high stiffness welded frame tested for stability.
  2. Heavy duty spherical seat , allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
  3. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request.
  4. Piston travel limit switch (Extra cost)
  5. Emergency stop button


Salient fetchers of data manager PC software (Optional At Extra Cost.)

  1. Two way communication i.e. machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
  2. Results directly saved in excel file
  3. Graph also saved in excel file
  4. Capable to save customer name, other details of cutomer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
  5. Capable to print direct report from the computer
  6. Capable to select different test perameters like pace rate, sample size and area from the computer (software)


Note:

  1. Use of 3 KVA three phase servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.


Capacity

1000 Kn

Platen size in mm

200 mm Dia

Ram Dia in mm

165 mm

Ram Travel in mm

50 mm

Vertical daylight in mm

300 mm

Weight approx in kg

417 kg

Least count

0.1 Kn or better

Load indication and Control

4" Coloured touch screen controller

Accuracy

± 1%

Pace rate controlling accuracy

10%

Pumping

Motorized

Pump Speed

Dual speed

Motor

Stepper Motor

Reading

Digital

Release valve operation

Required

Auto stop after failure of specimen

Available, machine stops after completion of test

Auto Release of Pressure after specimen failure

Not Available, Need to release pressure manually after the completion of test

Calculation of result

Automatic

Holding of Max.Load

Yes

Pace Rate or Rate of Loading indication

Yes

Operator skill to control Pace Rate

Not Required

Bar Graph

Available

Multi Channel operation

3 channel operation possible, flexural and compression frame can be attached

Saving of records

Possible-10 reading

Pen drive slot

Inbuilt pen drive slot. (saves reading in excel format) (Record date-time, Sr no and Peak load and N/mm2)

Real time graph

Available, on controller itself

Printer interface (Direct connectivity to printer w/o computer)

In built

Flexural attachment

Possible, all calculations will be made automatically

Splitting Tensile Test

Possible, all calculations will be made automatically

Auto internal Calibration without proving ring

Yes

Piston over travel safety cut off

Available

Over load safety cut off

Yes

Shot circuit protection

Yes

Overall Dimensions

Horizontal daylight in mm

300 mm

Power Supply

230V AC, Single phase

Standard Supply

Spacers - 3 nos.

Pen drive

2.5 meter cord wire with plug

Pumping unit

Loading unit

Optional fittings at extra cost

PC software

Displacement controlled operation

Modulus of Elasticity Calculation (MOE) attachment

Split tensile test attachment

Flexural test attachment

LAN Connectivity

INQUIRE NOW
name
company name
city
Email
Mobile number
requirments
message
Reset

Inquiry right arrow Inquiry left arrow INQUIRY

catalogue-image