Compliance With Following International Standards:
EN 12390‑4, ASTM C39, AASHTO T22, IS : 14858 (2000)
Automatic Test Execution:
Once the machine has been switched on, the specimen positioned and centered, the only required operations are
Set test parameters ‑ including load rate:
- Press the start button
- Tighten the pressure valve
- The machine automatically: starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically stops the motor upon specimen failure
- Release the pressure valve
- The test execution conforming to Standards can be easily proved.
- Working on 240V, 50‑60Hz, single phase.
- Dual stage pump assuring fast piston approach and precise test execution
- Test execution conforming to EN 12390‑4, ASTM C39, AASHTO T22
- Controllable pace rate from 0.1 KN/Sec to 10 KN/Sec.
- Auto stop after completion of each test.
- Soft platen‑to‑specimen contact and smooth load rate control from the very beginning of the ramp
Frame:
- Four column high stiffness welded frame tested for stability.
- Heavy duty spherical seat , allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
- Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request.
- Piston travel limit switch (Extra cost)
- Emergency stop button
Salient fetchers of data manager PC software (Optional at Extra cost.):
- Two way communication i.e machine operates from computer and from the touch screen controller both (Stat, stop, save data and save graph)
- Results directly saved in excel file
- Graph also saved in excel file
- Capable to save customer name, other details of cutomer, ageing of cube moulds, identification mark of the cube mould, date and time of testing
- Capable to print direct report from the computer
- Capable to select different test perameters like pace rate, sample size and area from the computer (software)
Automatic Compression Testing Machine Exported in Russia, Bangladesh, Nepal, Bhutan, Sri Lanka, Indonesia, Taiwan, South Africa, Kenya, Morocco, Egypt, Malaysia.
Note:
Use of 3 KVA three phase servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.
Capacity |
1000 Kn |
Platen size in mm |
200 mm Dia |
Ram Dia in mm |
165 mm |
Ram Travel in mm |
50 mm |
Vertical daylight in mm |
300 mm |
Horizontal daylight in mm |
300 mm |
Weight approx in kg |
600 Kg |
Least count |
0.001 KN or better |
Load indication and Control |
7" Coloured touch screen controller |
Accuracy |
± 1% |
Pace rate controlling accuracy |
10% |
Pumping |
Motorized |
Pump Speed |
Dual speed |
Motor |
Servo motor |
Reading |
Digital |
Release valve operation |
Not Required |
Auto stop after failure of specimen |
Available, machine stops after completion of test |
Auto Release of Pressure after specimen failure |
Available, pressure release automatic after completion of test |
Calculation of result |
Automatic |
Holding of Max.Load |
Available |
Pace Rate or Rate of Loading indication |
Available |
Operator skill to control Pace Rate |
Not Required |
Bar Graph |
Not Required |
Multi Channel operation |
3 channel operation possible, flexural and compression frame can be attached |
Saving of records |
infinite records with Pen drive |
Pen drive slot |
Inbuilt pen drive slot. (saves reading in excel format) (Record date-time, Sr no and Peak load and N/mm2) |
Real time graph |
Available, on controller itself |
Printer interface (Direct connectivity to printer w/o computer) |
In built |
Computer operation software and data Acquisition software |
Available at extra cost |
Displacement controlled operation |
Available at extra cost |
Modulus of Elasticity Calculation |
Available at extra cost |
Flexural attachment |
Possible, all calculations will be made automatically |
Splitting Tensile Test |
Possible, all calculations will be made automatically |
LAN Connectivity |
Possible, in built LAN port |
Auto internal Calibration without proving ring |
Available |
Piston over travel safety cut off |
Available at extra cost |
Over load safety cut off |
Available |
Shot circuit protection |
Available |