Salient Features :
- Double wall design
- Single chamber for steam and water
- Working chamber made of stainless steel LM - 304 grade having 2mm thickness.
- Exterior Body is made of stainless steel LM - 304 Grade having 1mm thickness.
- Lid, flange & bottom sheet also made of stainless steel. All joints argon welded.
- Joint less silicon gasket
- Heavy duty industrial flange heater.
- Fully Automatic operation; cycle is commenced by press of START button.
- Initial air purging cycle; at the beginning air is automatically removed from the chamber.
- Automatic steam exhaust (Depressurized) at the end of cycle.
- Microprocessor based Digital Temperature Indicator cum Controller.
- PID Controller Controls temperature/pressure precisely at set value.
- Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve
- Complete unit is Hydraulically tested at 60 PSI pressure
- Supplied with Calibration certificate with traceability
- Provided with DQ, IQ, OQ, PQ documentation (AT EXTRA COST)
- Validation ports provided for temperature mapping as standard supply. (On customer request)
Solenoid valve :
- Initial automatic air purging cycle
- Automatic steam exhaust (Depressurized) at the end of cycle.
Safety Features :
- Low water level heater safeguard.
- Low water level cut off
- Safety high pressure release valve (Spring loaded mechanical valves)
- Safety high temperature cut off.
Operation Type |
Fully Automatic Operation |
Temperature controller |
Microprocessor based Digital Temperature Indicator cum Controller |
Display |
Digital Display |
Temperature sensor |
PT - 100 |
Pressure Range |
15 to 22 PSI, factory set at 15 PSI |
Temperature Range |
121°C to 125 °C |
Temperature Resolution |
0.1 °C |
Temperature Accuracy |
± 0.5 °C |
Working Chamber Size |
30cm x 50cm (Dia x Height) |
Volume |
35 Liters |
Power |
Rating 1 KW |
Operates on |
230V/15A/50 Hz |
Sterilization timer |
In built digital timer; timer can be adjusted as per sterilization load requirement |
Safety Valves |
01 Solenoid valve, 02 Mechanical Valves set at different PSI & 01 Manual release valve |
Overall Dimensions in Inches (L x W x H) |
23.6 x 35.4 x 42 |
Weight (Approx.) |
80 Kg |