WET SIEVING APPARATUS - IS : 4031 (PART-15)
As per IS : 4031 (PART-15). Wet Sieving Apparatus . with Pressure Gauge, Spray Nozzle fitting to attach the Apparatus to a Water Source.
SPLITTING TENSILE ATTACHMENT FOR THIN BED MORTAR OF AAC BLOCKS - (ASTM C1660, ASTM C1006)
To perform splitting tensile strength tests in accordance with ASTM C1006 and ASTM C1660, a specialized attachment is required for your compression testing machine. This attachment typically includes steel rods that apply a line load along the specimen's surface, inducing tensile stress until failure.
COMPRESSION FRAME JIG ASSEMBLY AS PER ASTM C109
This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2” or 50mm mortar cement cube specimen. This jig can be fitted to Compression Test Machine.
SHRINKAGE BAR MOULD - 25 X 25 X 282 MM - THREE MOULD COMPARTMENT
Shrinkage Bar Mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity.
WATER RETENTION TEST APPARATUS - IS-2250, IS 10850
To determine the water retentivity characteristics of masonry mortar. As per figure for 4 of IS 2250 (Appendix C). Complete with Aspirator Pump.
GILLMORE INITIAL SETTING NEEDLE
Used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime and certain mortars. ASTM C266, AASHTO T154, ASTM C141, ASTM C91.
CEMENT / FLY ASH SAMPLER - FOR BULK SAMPLING
The slotted tube-sampler will be between 1.5 to 1.8 meter long and about 35 mm in outside diameter and will consist of two polished brass telescopic tubes with registering slots which are opened or closed by rotation of the inner tube; the outer tube being provided with a sharp point to facilitate penetration. Extremely useful for sampling from Bulk Cement and fly ash ponds.
HYDRAULIC (KBR PRESS) - 15 TON - MANUAL
A Complete Laboratory hydraulic press producing a force of about 15 tones to make high quality FTIR Kbr pellet press, XRF pellet press & Thin Film Press applications. Typically used by R&D & QC labs for various pelleting applications for IR/FTIR/XRF Solid Sampling.
HYDRAULIC (KBR PRESS) - 25 TON - MANUAL
Complete Laboratory hydraulic press producing a force about 25 tones use to make high quality. Without Die set. Die set available at extra as per the application. Motorized version also available.
