PENSKY MARTEN FLASH POINT APPARATUS
The Pensky Martens Flash Point Apparatus is an essential laboratory device designed to determine the flash point of petroleum products, lubricating oils, and other viscous materials. This precision instrument conforms to the Pensky Martens Closed Cup (PMCC) method, ensuring accurate and reliable results that are critical for safety assessments in various industrial applications.
REID VAPOUR PRESSURE TEST APPARATUS WITH ACCESSORIES*-ASTM D323, ASTM D1267
Reid Vapour Pressure Test Apparatus IP 69 & IS 1488 (P:39) Bath for single test with FHP Stirrer and with Digital temp. controller and motorized stirrer, with 1 No.each Vapour Pressure Bomb consisting of One air chamber and one gasoline chamber with cock.NP Pressure Gauge 0‑15 PSI or 0‑30 PSI or 0‑45 PSI or 0‑100 PSI (Any one), Glass Thermometer IP 23 C (34 ‑ 42 deg C X 0.1 deg C).
OXIDATION STABILITY OF GASOLINE & AVIATION FUEL-IP 40, ASTM D525, IS 1448, P-28-INDUCTION PERIOD METHOD
Compliance Standards : IP 40, ASTM D525, IS 1448 (P-28), ISO 7536. To determine the oxidation stability of gasoline in finished form only, under accelerated oxidation conditions.
CLEAVELAND FLASH POINT APPARATUS -WITH VOLTAGE VARRIER
This apparatus is used for determination of flash point and fire point of petroleum products open cup flash between 79°C - 400°C as per specification IP 36 and IS: 1448 (P: 69) 2019. COMBINED test system either test by Gas JET or by oil wick arrangement with Voltage Varrier (Copper Coil type) control. The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of Voltage Varrier fitted to the apparatus. Suitable for operation on 220 Volts 50 cycles AC Circuits. Glass Thermometer IP 28C available at extra cost. Digital Temp.indicator can also be supplied at extra cost
ROUND JAR KINEMATIC VISCOSITY BATH-(ABOVE AMBIENT)-FOR 4 VISCOMETERS
This equipment is used to determine the kinematic and intrinsic viscosity of fuels, lubricants, and petrochemical raw materials at constant temperatures, following ASTM D 445 and similar methods. It features a 4-test bath with a round glass vessel, a digital temperature controller with dual display, and a PT-100 sensor. The temperature range is from 5°C above ambient to 150°C with ±0.5°C accuracy. It includes a motorized stirrer, a lighting attachment, and a universal viscometer holder. The system operates on 230V single phase. Glass U-tube viscometers are available separately.
OXIDATION STABILITY BY ROTATING PRESSURE VESSEL METHOD RPVOT - (ASTM D2272, ASTM D2112)
The Oxidation Stability Tester (RPVOT) is designed to assess the oxidation stability of engine, turbine, and inhibited mineral insulating oils by using the rotating pressure vessel method. It complies with ASTM D2272 and ASTM D2112 standards, incorporating a pressure transmitter, recorder, and specialized software to ensure precise measurements and data management.
COPPER CUM SILVER CORROSION BATH - NON REFRIGERATED - DIGITAL - ASTM D130, IP 227
Complies with following International Standards - IP 154 & IS 1448 (P 15), ASTM D 130, IP 227, ASTM D4814. Bath only, without accessories.
LPG COPPER STRIP CORROSION TEST APP - DIGITAL - ASTM D1838
ASTM D1838 is the standard test method used to detect components in Liquefied Petroleum (LP) gases that are corrosive to copper. This quality control test ensures that LPG will not deteriorate the copper or copper-alloy fittings and connections commonly found in storage, transportation, and utilization equipment. A polished copper strip is immersed in approximately 100 mL of an LPG sample. The sample is held in a specialized pressure cylinder and maintained at a temperature of 37.8°C (100°F) in a water bath for one hour. After one hour, the strip is removed and compared against the ASTM
COOLING BATH - -30 C - REFRIGERATED - FOR ASTM D721 OIL CONTENT IN PETROLEUM WAX
Generally as per ASTM D 97, ASTM D 2500 & equivalent test methods. Digital temperature display with resolution of 0.1°C. Temperature control to within ± 1°C . Long life, high safety zone, stainless steel immersion heaters, Automatic low liquid level safety cut-off & drain to empty tank almost fully, Seamless copper jackets, with disks, gaskets, test jars, corks, Non CFC, future safe, environment friendly refrigeration stainless steel tanks, powder coated exterior, PUF insulation, wheels for easy mobility. Single Tank, with 4 test positions, with temperature settings with resolution of 0.1°C for tests at successively lower temperatures, with four sets of jackets, jars, disks, gaskets and corks. With minimum temperature of -30°C.
KINEMATIC VISCOSITY BATH-ABOVE AMBIENT-35 X 15 X 20 CM-COMLETE SS 304-UP TO 100°C
Used for determination of kinematic and intrinsic viscosity of Petroleum products, Bitumen, emulsion and allied materials at constant temperatures in Accordance with ASTM D 445/IS:1206, IS 1448:P : 25 Sec I and other equivalent methods Double walled, outer chamber made of CRC powder coated with toughened Glass window panel, inner chamber made of S.S, FHP motorized stirrer for uniform Temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT–100 sensor. Temperature range from 5° C above ambient to 100° C. Resolution and Control Accuracy ± 0.1°C(at 40°C). Complete with Low wattage lighting Attachment, Universal Viscometer Holder, Viscometer Tray. Built in Digital Stop watch and Calibration certificate with traceability. Working on 230 V single phase. The Viscosity bath can be supplied Digital temp. controller having resolution of 0.01°C at extra cost. Glass U Tube Viscometer with certificate of constant and Glass Thermometers are also available at extra cost
LPG COPPER STRIP CORROSION TEST APP-DIGITAL-ASTM D 1838
The apparatus for the ASTM D1838 copper corrosion test requires a specialized temperature-controlled water bath and pressure test cylinders, along with essential accessories for preparing and evaluating copper strips.
