DROP POINT APPARATUS FOR GREASE-(ASTM D566, IP 132)-(MAGNETIC STIRRER CUM HEATER)
This test method covers the determination of the dropping point of lubricating grease.This test method is not recommended for use at bath temperatures above 288°C.
LEAKAGE TENDENCIES TESTER - ASTM D1263 - FOR WHEEL BEARING GREASE
Compliance Standards : ASTM D1263, FTM 791-3454
DROP POINT APPARATUS FOR GREASE-ASTM D566, IP 132-MOTORISED STIRRER WITH ACCESSORIES
This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above 288°C. Supplied without Glass Thermometer
DOUBLE ROW SELF-ALIGNING BALL BEARING-SKF 1306K-IP220, DIN 51802
Imported bearing SKF make, double row self-aligning ball bearing, conforming to SKF 1306K with a steel cage as specified in IP220, DIN 51802 test method
KINEMATIC VISCOSITY BATH-ABOVE AMBIENT-35 X 15 X 20 CM-COMLETE SS 304-UP TO 100°C
Used for determination of kinematic and intrinsic viscosity of Petroleum products, Bitumen, emulsion and allied materials at constant temperatures in Accordance with ASTM D 445/IS:1206, IS 1448:P : 25 Sec I and other equivalent methods Double walled, outer chamber made of CRC powder coated with toughened Glass window panel, inner chamber made of S.S, FHP motorized stirrer for uniform Temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT–100 sensor. Temperature range from 5° C above ambient to 100° C. Resolution and Control Accuracy ± 0.1°C(at 40°C). Complete with Low wattage lighting Attachment, Universal Viscometer Holder, Viscometer Tray. Built in Digital Stop watch and Calibration certificate with traceability. Working on 230 V single phase. The Viscosity bath can be supplied Digital temp. controller having resolution of 0.01°C at extra cost. Glass U Tube Viscometer with certificate of constant and Glass Thermometers are also available at extra cost
FLUX OVEN - 110 KG
ESAB’s drying & re-drying ovens for Electrodes and SAW ux provides uniform heating through well dispersed multiple heating elements. Thick glass wool thermal insulation ensures heat retention and efficient utilization of energy.User friendly controls with simple knobs for portable ovens and digital control panels & display for the bench and ux ovens reduce operator fatigue. The Flux ovens are designed for top loading and bottom dispensing with slag screen that acts as a sieve to lter out contaminants and to protect the heating elements.
DROP MELTING POINT APPARATUS FOR PETROLEUM WAX - IP 371 & U.S. PHARMACOPEIA - DIGITAL INDICATOR WITH ACCESSORIES
EIE Drop Melting Point Apparatus – Complete as per IP 371, supplied with necessary test accessories and IP 40C & IP 41C thermometers.
