GLASS BEADS FOR AOS TEST OF GEOTEXTILE - ASTM D4751
Glass Beads for AOS Test of Geotextile – ASTM D4751, used for determining the Apparent Opening Size (AOS) of geotextile materials in accordance with ASTM D4751 standards.
LIME REACTIVITY TEST APPARATUS - EN 459-2, ASTM C110
As per EN 459-2, ASTM C110, ASTM C91, ASTM C5. This apparatus includes a container for mixing lime with water, a Digital thermometer with thermocouple to monitor temperature changes and a stirrer to ensure consistent mixing.
MOHS' HARDNESS TEST KIT - FOR CONCRETE & CERAMIC TILES
While the Mohs' Hardness test was developed originally for testing minerals, the same concept can be applied to industrial materials. Use this kit for "scratch testing" substances to determine their Hardness according to the Mohs' Hardness scale, which ranges from 1 to 10, where Diamond is the hardest at 10, while Talc is softest at 1. How do you use the hardness picks? Simply scratch a smooth surface of your material with the picks of various indicated hardness. As an example, if a No. 5 pick scratches the material, but a No. 4 pick does not, then your material’s hardness is 4.5.
REID VAPOUR PRESSURE TEST APPARATUS WITH ACCESSORIES*-ASTM D323, ASTM D1267
Reid Vapour Pressure Test Apparatus IP 69 & IS 1488 (P:39) Bath for single test with FHP Stirrer and with Digital temp. controller and motorized stirrer, with 1 No.each Vapour Pressure Bomb consisting of One air chamber and one gasoline chamber with cock.NP Pressure Gauge 0‑15 PSI or 0‑30 PSI or 0‑45 PSI or 0‑100 PSI (Any one), Glass Thermometer IP 23 C (34 ‑ 42 deg C X 0.1 deg C).
STANDARD PENETRATION TEST APPARATUS(SPT)
Compliance with ASTM D‑1586, IS : 2131. Complete set up consists of Split spoon sampler (Head, Split barrel & shoe) : 1 No, Drive Monkey weight 63.5 kg: 1 No, Sampling drill A‑rod 1.5 meter long : 3 No, Guide Pipe Assembly : 1 No, Tripod 5 meter long with pulley assembly : 1 No, Rope for hammer: 10 Meter.
ASPHALT RECOVERY APPARATUS-BY ABSON METHOD-ASTM D1856
The Abson Method is designed to recover asphalt from bituminous paving mixtures for further testing without altering its original properties. The recovered asphalt can be tested for properties like penetration, ductility, and viscosity Compliance Standards : ASTM D1856, AASHTO T170, AASHTO R59, EN 12697-3, BS 598-102. Also known as ABSON Method.
HUMIDITY CHAMBER-60X60X60 CM
A humidity chamber, also known as a climatic chamber or environmental chamber, is widely used in laboratories to simulate different environmental conditions such as temperature and humidity. These chambers allow controlled conditions to test the performance, durability, and stability of various materials, products, and components when exposed to different environmental factors. The primary purpose is to ensure that the material or product can withstand specific climate-related stresses. Humidity chambers are essential tools across various industries for simulating environmental conditions that products might encounter during their lifecycle.
HUMIDITY CHAMBER-70X50X50 CM
A humidity chamber, also known as a climatic chamber or environmental chamber, is widely used in laboratories to simulate different environmental conditions such as temperature and humidity. These chambers allow controlled conditions to test the performance, durability, and stability of various materials, products, and components when exposed to different environmental factors. The primary purpose is to ensure that the material or product can withstand specific climate-related stresses. Humidity chambers are essential tools across various industries for simulating environmental conditions that products might encounter during their lifecycle.
SAND EQUIVALENT VALUE TEST APPARATUS
The Sand Equivalent Value Test is a method used to determine the cleanliness of fine aggregates by measuring the proportion of sand to clay-like materials in the sample. As per IS : 2720 (Part‑37), ASTM D2419, AASHTO T176, EN 933-8.
SULPHIDE SULPHUR TEST OF SLAG CEMENT WITH ACCESSORIES
As per IS:4032, clause 6.12. Complete with necessary glassware's and heating unit but without chemicals and titration assembly. Source of compressed air has to be arranged by the user.
HUMIDITY CHAMBER-125X90X90 CM
A humidity chamber, also known as a climatic chamber or environmental chamber, is widely used in laboratories to simulate different environmental conditions such as temperature and humidity. These chambers allow controlled conditions to test the performance, durability, and stability of various materials, products, and components when exposed to different environmental factors. The primary purpose is to ensure that the material or product can withstand specific climate-related stresses. Humidity chambers are essential tools across various industries for simulating environmental conditions that products might encounter during their lifecycle.
