PAN MIXER-40 LTRS-WITH REMOVABLE PAN, TROLLEY AND STAND
Suitable to Cast 9 Cube Mould of 15 cm at a Time in single batch. Detailed specifications mentioned in the long description. The machine is capable to caste second batch immediately after first batch as the first pan can be removed with trolley and placed on the table. And with the help of second pan, second mix design can be started.
CAPPING SET-VERTICAL-WITH ALL ACCESSORIES-IS 516, ASTM C617-
Complete with Cylinder capper, Cylinder carriers, Capping compound 5 kg, Melting pot and rubber capping pad for 150mm and 100mm dia cylinders.
THERMAL CONDUCTIVITY BY GUARDED HOT PLATE METHOD FOR AAC BLOCKS
Measures the steady-state heat flux through flat specimens when their surfaces are in contact with solid, parallel boundaries held at constant temperatures. The guarded-hot-plate apparatus consists of a metered section and a primary guard, designed to create isothermal surfaces on the specimen faces, ensuring unidirectional heat flow. Procedure Involves placing the test specimen between a hot plate and a cold plate, establishing a steady-state temperature gradient, and measuring the heat flux through the specimen. Commonly used to evaluate the thermal insulation properties of materials in industries such as construction, manufacturing, and materials science.
DIGITAL MAN HOLE COVER TESTING MACHINE - 500 KN
The manhole cover testing machine is designed as per IS 12592. The machine will be able to accommodate manhole cover of 1200 mm x 1200 mm size. With variable pace rate of the machine from 2 kN / sec to 10 kN / sec. The machine with digital read out, showing actual load, peak load and permanent set .
AUTOMATIC FLEXURAL STRENGTH TESTING MACHINE
As per IS:9399-1979 (R.A.2013)/IS 516 (Part 1/Sec 1) : 2021, BS:1881 and ASTM C78, EN 12390-5, AASHTO T22, Automatic test execution. Controllable pace rate from 1.0 KN/Sec to 10 KN/Sec
AIR ENTRAINMENT METER - 0.005 CUBIC MTR - IS: 1199
The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter (5 Kg) capacity for maximum size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly. As per IS:1199 (P-4) Water-Column Method
AUTOMATIC COMPRESSION TESTING MACHINE - 250 KN
Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Automatic pace rate control, auto stop and manual release on failure of test specimen.
FULLY AUTOMATIC FLEXURAL STRENGTH TESTING MACHINE
As per IS:9399-1979 (R.A.2013)/IS 516 (Part 1/Sec 1) : 2021, BS:1881 and ASTM C78, EN 12390-5, AASHTO T22, Fully automatic test execution. Controllable pace rate from 0.03 KN/Sec to 10 KN/Sec
PAVER BLOCK FLEXURAL TESTING MACHINE - IS : 15658 (Annex G)
As per IS : 15658 (Annex G). Electro-Mechanical Design, quite and vibration free operation, Automatic Pace rate control @ 6 KN/min. PC connectivity with software available at extra cost.
FOUR CELL RCPT
The Rapid Chloride Permeability Test (RCPT) evaluates the resistance of concrete to chloride ion penetration, as per ASTM C1202, AASHTO T277, and equivalent standards. This test measures the electrical charge (in coulombs) passed through a concrete sample over 6 hours, reflecting the material's permeability to chloride ions.
THREE CELL RCPT
The Rapid Chloride Permeability Test (RCPT) evaluates the resistance of concrete to chloride ion penetration, as per ASTM C1202, AASHTO T277, and equivalent standards. This test measures the electrical charge (in coulombs) passed through a concrete sample over 6 hours, reflecting the material's permeability to chloride ions.
ACCELERATED CARBONATION CHAMBER
Carbonation Chamber for Accelerated Carbonation test of Concrete. Supplied complete with 30 kg CO2 Cylinder (for within India Supply only) Prism Mould 100mm X 100mm X 200mm, Attachment for Splitting the test specimen, CTM etc. are to be procured at extra cost.
CONCRETE PERMEABILITY TESTER - AS PER IRS CONCRETE BRIDGE CODE WITH COMPRESSOR
The complete set up is designed as per Figure G-1 - Appendix G of IRS concrete bridge code. Supplied complete with 3 Nos. Non corrodible Permeability cell, 3 Nos. Permeability mould of 200mm dia X 120mm height and Air Compressor. Sealing compound and resin available at extra cost
CONCRETE PENETROMETER SPRING TYPE - (PENETRATION RESISTANCE APPARATUS) - IS 8142. IS:1199-PART 7
As per ASTM C403, IS:8142, IS:1199-part 7
EIGHT CELL RCPT
The Rapid Chloride Permeability Test (RCPT) evaluates the resistance of concrete to chloride ion penetration, as per ASTM C1202, AASHTO T277, and equivalent standards. This test measures the electrical charge (in coulombs) passed through a concrete sample over 6 hours, reflecting the material's permeability to chloride ions.
DIGITAL INDICATOR FOR HAND OPERATED COMPRESSION TESTING MACHINE
Two line digital indicator. Saves peak hold. Least count 0.1 KN. Can be operated battery (optional has to inform at the time of placing order) or AC supply. Battery has to be purchased separately.
